Free Delivery on all orders over £99*

Screwless Matt White Switches & Sockets

Matt white screwless plates suit painted and neutral walls, and our Knightsbridge range covers the switches, sockets and data outlets a whole scheme needs. Clean, clip-on fronts hide the fixing screws, so each plate sits flat against the wall. From rocker switches to USB sockets and network outlets, you can match one finish across every room.

Filter By
  • Featured
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, new to old
  • Date, old to new
66 Products
  • Featured
  • Price, low to high
  • Price, high to low
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Date, new to old
  • Date, old to new

Pairing matt white plates with your walls

Matt white sits quietly against painted plaster, off-white and pale neutral schemes, where a glossy plate would catch the light and stand out. The screwless design clips a front plate over the mounting frame, hiding the fixing screws for a flush, uncluttered face. Across our Knightsbridge range the plates are built on metal frames with white inserts, so a switch in the hallway reads the same as a socket in the kitchen or a dimmer in the living room.

Choosing one finish for a room keeps the wall calm. We stock single, double and multi-gang plates, most in the same matt white screwless style, so banks of switches by the door line up with the sockets along the worktop and the isolators in the utility area.

USB charging and data outlets

Where you charge phones and laptops, a plain socket is often not enough. Our range includes 13A sockets with built-in USB charging, including dual and quad USB and combined USB-A and USB-C fast charge ports, so phones and tablets charge without a plug adaptor on the worktop.

For data and AV we stock CAT6a RJ45 network outlets, multimedia combination plates and a Bluetooth speaker outlet, all in matching matt white screwless. Modular combination plates let you mix a socket with the data and USB modules a desk or media wall calls for, while keeping the front plate consistent.

Switches, dimmers and specialist fittings

The switch side runs from 10A and 10AX rocker switches in one to four gangs, including a 10AX fan isolator, through to 20A and 45A double pole switches for cookers, plus a 32A key card switch. Intelligent dimmers handle a 10-200W load and 5-150W on LED. We also stock shaver sockets, fused spur units, anti-microbial switches and key lockable sockets in the same finish.

Anything connected to fixed wiring should be fitted by a qualified electrician, who can confirm the right rating and switching mode for the circuit.

Frequently Asked Questions

What makes these plates screwless?
A screwless plate is built in two parts. A mounting frame is fixed to the wall box first, then a clip-on front plate snaps over it and conceals the fixing screws. The result is a flat, uninterrupted matt white face with no visible screw heads. The front can be unclipped later for access, so the look stays tidy without making the plate harder to work on.

Will matt white suit my wall colour?
Matt white works best with painted, off-white and pale neutral walls, where its low-sheen finish blends in rather than reflecting light. Because the inserts are white too, the plates read as a single tone. If your scheme runs darker, matt white can still work as a crisp, deliberate contrast against deeper wall colours rather than blending in.

Which USB and data options are in the range?
We stock 13A sockets with built-in USB charging, including dual and quad USB versions and combined USB-A and USB-C fast charge ports. For data and audio there are CAT6a RJ45 network outlets, telephone extension sockets, multimedia combination plates and a Bluetooth speaker outlet. Modular combination plates also let you pair a socket with data or USB modules behind one matt white screwless front plate.

Can I match these across a whole room?
Yes. The matt white screwless style runs across switches, sockets, dimmers, fused spurs and data outlets in single, double and multi-gang sizes, so every plate on a wall shares the same finish and inserts. That lets a bank of switches by the door, the sockets along a worktop and any isolators or spurs sit together as one consistent scheme.

Do I need an electrician to fit them?
Anything connected to fixed wiring should be installed by a qualified electrician. They can confirm the correct amperage and switching mode for the circuit, whether that is a 13A socket, a 45A double pole cooker switch or an intelligent dimmer. If you are unsure about any part of the wiring or the circuit, have it checked by a professional before any work goes ahead.

Related Collections

BestSellers

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    • Free UK Delivery

      Over £99. Ships worldwide.

    • Price Match Promise

      We'll match any like-for-like price.

    • Birmingham Based

      British heritage. Worldwide delivery.

    • Hand-Picked Range

      Beautiful Pieces Selected