Early Black Friday: 20% off selected designer lighting, in stock now

Free UK delivery over £99

Incandescent Light Bulbs

We stock incandescent light bulbs for UK fittings, and our range covers screw and bayonet caps from small E14 and B15 to E27 and B22. Most are filament lamps and most give a warm white light. You will find clear and coloured finishes, speciality and reflector shapes, and many dimmable bulbs. Check the cap and maximum wattage your fitting takes before you choose.

Filter By
  • Featured
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, new to old
  • Date, old to new
26 Products
  • Featured
  • Price, low to high
  • Price, high to low
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Date, new to old
  • Date, old to new

Why choose incandescent light bulbs?

An incandescent lamp makes light by heating a fine filament until it glows, which gives the soft, warm light people still want in lamps, pendants and decorative fittings. LED now handles much everyday lighting, but an incandescent bulb remains the simple like-for-like swap when a fitting was built around that kind of bulb, or when you want its familiar glow. Most of the bulbs we stock are filament lamps, and we also stock a few halogen lamps, a type of incandescent lamp that burns a little brighter and whiter.

Which cap does your incandescent bulb need?

Match the cap first. Screw caps start with E, for Edison, and twist into the holder; bayonet caps start with B and push in, then turn to lock. The number is the width of the cap in millimetres. We stock bulbs in E14 small Edison screw (SES), E27 Edison screw (ES), B15 small bayonet (SBC) and B22 bayonet (BC), the traditional UK household cap. There is also a bulb with the narrower E12 candelabra screw. Caps that look alike are not interchangeable, so check the old bulb before you order.

Incandescent bulb shapes and sizes

Most of our bulbs are small, and most come in speciality shapes, so compare the shape and length of your old bulb before you choose. Many are reflector bulbs, with a reflective coating that sends the light forward in a beam instead of spreading it round the room, useful when you want light aimed at a particular spot. We also stock a few GLS bulbs, the classic rounded household shape, and a golfball bulb, a smaller round shape. If the bulb sits inside a shade, cover or appliance, measure the space first, as a tight fit leaves no room for heat to escape.

Wattage and brightness of incandescent lamps

With incandescent lamps, wattage is a fair guide to brightness: the higher the wattage, the more light and heat a bulb gives off. Our range runs from under 10W to 100W and above, with many bulbs between 10W and 25W. Brightness itself is measured in lumens, so compare lumens where a listing gives them. Before you buy, check the maximum wattage marked on your fitting or shade and choose a bulb at or below it.

What colour of light do incandescent bulbs give?

Most of our bulbs give a warm white light, and many a very warm white. The lower the kelvin figure on a bulb, the warmer the light. Most have a clear finish, which shows off the filament and suits open shades and bare-bulb pendants, and a few have a white finish. For colour, we stock red lamps and a few other coloured bulbs. A coloured bulb filters its own light, so it works best alongside other lighting rather than as the main light in a room.

Dimming and fitting incandescent light bulbs

Many of our bulbs are dimmable and many are listed as non-dimmable, so check the listing before you put a bulb on a dimmer switch. A dimmer made for traditional incandescent loads usually suits a dimmable incandescent bulb; check its minimum and maximum load against the wattage you plan to use. Changing a bulb is simple, but for a replacement fitting or any wiring work, use a qualified electrician. In England and Wales, some of that work falls under Part P of the Building Regulations.

What to check before you order an incandescent lamp

With the power off and the bulb cool, take the old bulb out and note its cap, its shape and length, its wattage and whether it sits on a dimmer. Then check the maximum wattage on the fitting, and think about the light you want, from warm white for a reading lamp to very warm white for a softer evening glow. If the old bulb was a reflector, choose another reflector so the light falls where it did before.

Frequently Asked Questions

Can you still buy incandescent lamps in the UK?

Yes. Much general lighting in UK homes has moved to LED, but incandescent lamps are still sold, and our range covers E14, E27, B22 and B15 caps. Most of our bulbs are small filament lamps, and many are dimmable.

Why choose an incandescent bulb over an LED?

For the soft, warm light of a glowing filament, to replace like for like in a fitting designed for a traditional bulb, and for smooth dimming where a bulb is listed as dimmable. An LED uses less energy and lasts longer, so it makes sense for lights left on for hours, while an incandescent lamp suits lights you use for shorter spells.

What is the difference between incandescent and halogen bulbs?

A halogen bulb is a type of incandescent lamp with halogen gas around the filament, which lets it run hotter, so its light is a little whiter and brighter for its wattage. A standard incandescent bulb gives a softer, warmer light. We stock a few halogen lamps alongside our incandescent bulbs.

Will my dimmer switch work with an incandescent bulb?

It should, as long as the bulb is listed as dimmable and its wattage sits within your dimmer's minimum and maximum load. If your dimmer was chosen for LED, check that its rating also covers incandescent or halogen loads. Many of our bulbs are dimmable, but many are not, so check the listing first.

Will an E12 bulb fit an E14 lamp holder?

No. An E12 candelabra cap is narrower than an E14 small Edison screw, so it will not screw in securely or make proper contact. Match the cap code on your old bulb exactly; we stock E14 bulbs as well as a bulb with an E12 cap.

Can I use a higher-wattage bulb than my fitting allows?

No. The maximum wattage marked on a fitting or shade is set to stop it overheating, so never fit a bulb above that figure. If you need more light, add another lamp to the room or choose a fitting rated for a higher wattage.

How do I change an incandescent bulb safely?

Switch off at the wall or unplug the lamp, then let the old bulb cool, as incandescent and halogen lamps get hot in use. Unscrew a screw cap, or push in and turn a bayonet cap to release it, and fit the replacement the same way. If you handle a halogen lamp, use a clean cloth, as oil from your skin can shorten its life.

Our Reviews

From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.