Free Delivery on all orders over £99*

Outdoor Ground Lights

Recessed ground lights from Ideal Lux and more, set flush into paths, decking, driveways and borders to wash light up walls or mark a route. The range covers walkover and driveover fittings in stainless steel, resin and metal, rated IP65 up to IP68 for buried, wet conditions. Wattages run from under 10W accent points to 18 to 21W landscape bars, in warm white 3000K and cool white 4000K.

Filter By
  • Featured
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, new to old
  • Date, old to new
91 Products
  • Featured
  • Price, low to high
  • Price, high to low
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Date, new to old
  • Date, old to new

What the ground light range covers

Recessed ground lights set flush into the surface to wash light up a wall or mark out a route underfoot. The range covers walkover fittings for paths and decking and tougher driveover units built to take vehicle weight, alongside longer landscape bars for borders. Materials run from stainless steel and steel to resin and metal, in finishes such as grey, black, stainless steel and chrome. Outputs span small accent points up to 18 to 21W landscape bars, in warm white 3000K and cool white 4000K, with some RGB.

Walkover, driveover and landscape types

Walkover fittings suit paths, patios and decking where they take foot traffic, while driveover models are made for drives and other spots that vehicles cross. Deck light kits give a run of small, low-output points for steps and borders, and the longer landscape bars cast a broader band of light along a wall or planting. Choose warm white for a softer garden feel or cool white for a crisper, more functional look.

Weather rating and recessing

These fittings sit in the ground, so they carry higher weather ratings, from IP65 through IP67 and up to IP68 for buried, wet conditions. Set each fitting into a prepared recess so the top sits flush with the surface, allowing for drainage beneath as the maker directs. Space accent points evenly along a path to mark the route, and position uplights close to a wall or planting to graze light upward. A driveover fitting must be rated and seated to handle the load it will carry.

Choosing the right fitting

Start with where it goes: a path or deck points to a walkover fitting, a drive needs a driveover unit, and a border may suit a landscape bar. Decide whether you want to mark a route or wash a surface, then pick a finish in stainless steel, grey or black to sit quietly in the ground. Match the weather rating to how wet and exposed the spot is, choosing the higher figures for fully buried positions. Free UK delivery over £99, worldwide shipping.

Frequently Asked Questions

Can I drive or walk over these?

Many are rated for walkover use, and a good number are drive-over fittings built to take vehicle weight on a driveway. Product titles say which is which, so pick a walkover light for a footpath and a drive-over model where cars pass.

What IP rating do ground lights need?

Sitting at ground level they face standing water, so most fittings here are rated IP65, with several running up to IP67 and IP68 for the most exposed, submersible-style spots. For paths and patios IP65 is sound; near drains or low points where water pools, choose IP67 or IP68.

Can I angle the beam?

Several models are tiltable, letting you aim the beam to graze a wall, a tree or a step rather than only firing straight up. Fixed designs give a clean, flush finish where you want even wash with no adjustment.

How do I fit them?

These are recessed into the ground or hard surface and run on buried cable, so they need planning before paving or decking goes down. Because the supply is fixed wiring run outdoors, we recommend a qualified electrician carries out the installation.

Our Reviews

From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.