Description
The Edge is a 1m linear LED ground light built from black powder-coated aluminium with an integrated 15W LED strip running the full length of the body. The fitting mounts flush to the ground on two bracket feet at each end, with a swivelling diffuser that rotates to direct light upwards, across horizontal surfaces, or at an angle onto walls, planting beds or architectural features.
Designed for outdoor pathways, patio edges, garden borders, and driveway perimeters, the Edge provides continuous line-of-light rather than pooled spots. The IP65 rating seals the LED and driver against dust ingress and low-pressure water jets from any direction, making the fitting suitable for ground-level installation in exposed positions including coastal gardens. The 3000K colour temperature and 1000 lumen output provide warm white illumination across the 1m run, sufficient to mark pathway edges or wash light across 2-3m of vertical wall surface when angled upwards.
The aluminium body measures 100cm x 6.5cm x 5.9cm and weighs approximately 1.2kg. The black powder coat resists UV degradation and corrosion in wet conditions. The two mounting brackets fix to hard surfaces (paving, concrete, decking) with screws, or can be staked into firmer soil or gravel with ground anchors. The swivel mechanism on the diffuser allows the light direction to be adjusted after installation without repositioning the entire fitting, useful when planting layouts change or seasonal growth alters light requirements.
Specification
| Height |
5.9cm |
| Length |
100cm |
| Width |
6.5cm |
| Finish |
Black |
| Construction |
Aluminium |
| IP Rating |
IP65 |
| Voltage |
AC 220-240 |
| Wattage |
15 |
| Colour Temperature |
3000K |
| Min Colour Temperature |
3000K |
| Warranty |
3 Year Guarantee |
Downloads
Product Manual
Frequently Asked
What does the IP65 rating mean for installation?
IP65 means the fitting is fully dust-sealed and protected against low-pressure water jets from any direction. It can be installed in ground-level positions exposed to rain, garden irrigation spray and puddle formation, but should not be submerged or installed in areas subject to flooding.
Can the light direction be adjusted after installation?
Yes. The diffuser swivels on the aluminium body, allowing you to redirect the beam upwards onto walls, across horizontal surfaces, or at angles onto planting beds without needing to reposition the mounting brackets.
What surfaces can it be mounted to?
The two bracket feet fix to hard surfaces such as paving slabs, concrete, or decking with screws. For installation into soil or gravel, ground anchors or stakes are needed to provide a stable base for the brackets.
Is the LED replaceable?
The LED is integrated into the fitting and is not user-replaceable. The LED is rated for approximately 25,000-30,000 hours of operation, which equates to around 10-15 years of typical evening garden lighting use.