Free Delivery on all orders over £99*

Power Management

Drive low-voltage AV and lighting from a tidy, reliable supply. This AVSL range runs from compact switch-mode units with selectable 3-12V DC output and multiple adaptor plugs, through fixed 12V LED drivers from LYYT, to high-current 13.8V supplies reaching 600W for hungrier gear. Pick the voltage and current your kit calls for, whether you are powering a single strip or a full rack.

Filter By
  • Featured
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, new to old
  • Date, old to new
16 Products
  • Featured
  • Price, low to high
  • Price, high to low
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Date, new to old
  • Date, old to new

Power Management

Power management here covers the supplies that drive low-voltage AV and lighting from a tidy, reliable source, turning mains power into the DC voltage and current a piece of kit needs. Choosing the right unit comes down to matching the output voltage and the current rating to the equipment you are running.

At the compact end there are switch-mode power supplies with selectable 3 to 12V DC output, supplied with a set of adaptor plugs so a single unit can power a range of small devices. These span outputs such as 600mA, 1000mA, 1500mA and 2250mA, covering everyday low-current jobs where you want one flexible supply rather than several fixed ones. The adaptor plugs let you change the connector to suit different devices.

For lighting, there are fixed 12V DC LED drivers rated from 2A through to 5A, supplied for indoor use with a short hard-wired lead. These give a steady 12V feed for LED strips and similar fittings, with the current rating setting how much lighting a single driver can carry. Stepping up in power, the range also includes higher-current 13.8V switch-mode supplies, from smaller units up to high-output models reaching 600W, including multi-channel versions, for heavier loads where more current is needed.

Whether you are powering a single LED strip, a small stack of devices or a fuller setup, the spread of voltages and current ratings means you can pick a supply sized to the job rather than over- or under-specifying it. Free UK delivery over £99, with worldwide shipping available.

Frequently Asked Questions

What is a switch-mode power supply?
A switch-mode power supply converts mains power to a low-voltage DC output efficiently and in a compact size. Several units in this range are switch-mode, including selectable 3 to 12V models and higher-current 13.8V supplies.

What does a selectable 3 to 12V output mean?
It means you can set the supply to one of several DC voltages between 3V and 12V to match the device you are powering. These units come with a set of adaptor plugs so the connector can be changed to suit different equipment.

What is an LED driver used for?
An LED driver provides a steady low-voltage feed for LED lighting such as strips. This range includes fixed 12V DC drivers from 2A to 5A for indoor use, each supplied with a short hard-wired lead.

How do I choose the right current rating?
Pick a supply whose current rating, given in amps or milliamps, comfortably covers what your equipment draws. The range spans low-current units up to high-output models, so you can size the supply to the load rather than guessing.

What are the higher-power 13.8V supplies for?
The 13.8V switch-mode supplies are aimed at heavier loads, with outputs running up to 600W and multi-channel versions available. They suit setups that need more current than a small adaptor-style unit can provide.

BestSellers

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    • Free UK Delivery

      Over £99. Ships worldwide.

    • Price Match Promise

      We'll match any like-for-like price.

    • Birmingham Based

      British heritage. Worldwide delivery.

    • Hand-Picked Range

      Beautiful Pieces Selected