Free Delivery on all orders over £99*

Power Cables

Replace a missing lead or extend one across the room with the right fit first time. This AVSL range covers UK plug to IEC C13 leads, clover leaf and figure 8 cables, plus IEC plug-to-socket extension leads in 1m and 2m lengths. Heat-resistant and right-angle versions suit tight spaces, with C14 plug adaptors on hand to bridge mismatched AV and IT kit.

Filter By
  • Featured
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, new to old
  • Date, old to new
22 Products
  • Featured
  • Price, low to high
  • Price, high to low
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Date, new to old
  • Date, old to new

Mains and IEC power cables to replace or extend a lead

A missing or too-short power lead can hold up a whole setup, and this range covers the common mains and IEC cables that get kit running again. The mainstay is the UK plug to IEC C13 lead, the standard connector found on desktop PCs, monitors, printers and similar equipment, stocked in 1m and 2m lengths and in black or white. Right-angle IEC C13 versions turn the connector flat against the wall, handy where a unit sits close to the skirting and a straight plug would stick out too far.

Smaller appliances are covered too. UK plug to clover leaf leads suit equipment with a three-pin C5 inlet, while figure 8 leads handle the two-pin C7 inlet found on many AV and smaller devices, available in 1m, 2m and 5m lengths. IEC plug to IEC socket extension leads add reach between two pieces of kit, and heat-resistant hot plug leads suit equipment that runs warm. Where two connectors do not match, C14 plug adaptors bridge them, converting a C14 inlet to a C5 cloverleaf or a C7 figure 8 connection.

  • UK plug to IEC C13 leads in 1m and 2m, straight and right-angle
  • Clover leaf C5 and figure 8 C7 leads in 1m, 2m and 5m lengths
  • IEC plug to socket extension leads to add reach between kit
  • C14 plug adaptors to bridge C5 and C7 connectors

Free UK delivery over £99, with worldwide shipping available.

Frequently Asked Questions

What is a UK plug to IEC C13 lead used for?
The IEC C13 is the standard three-pin power connector on desktop PCs, monitors, printers and much office and AV equipment. These leads put a UK plug on one end and a C13 socket on the other, in 1m and 2m lengths and in black or white.

What is the difference between clover leaf and figure 8 leads?
A clover leaf lead uses a three-pin C5 connector, while a figure 8 lead uses a two-pin C7 connector. Both are common on smaller appliances and AV kit, so check the inlet shape on your device before choosing. Figure 8 leads come in 1m, 2m and 5m.

When would I use a right-angle lead?
A right-angle IEC C13 lead bends the connector flat against the equipment, which helps where a unit sits close to a wall or in a tight space and a straight connector would protrude too far. These come in 1m and 2m.

What do the C14 plug adaptors do?
The C14 adaptors convert one connector type to another at the kit end, bridging a C14 inlet to a C5 cloverleaf or a C7 figure 8 connection, so you can join mismatched AV and IT equipment without rewiring.

Can I extend an existing IEC lead?
Yes, the IEC plug to IEC socket extension leads add reach between two pieces of equipment, available in 1m and 2m, so you can move a device further from its supply without replacing the original lead.

Related Collections

BestSellers

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    • Free UK Delivery

      Over £99. Ships worldwide.

    • Price Match Promise

      We'll match any like-for-like price.

    • Birmingham Based

      British heritage. Worldwide delivery.

    • Hand-Picked Range

      Beautiful Pieces Selected