Description
The Knightsbridge LEDM07B is a 1.5W blue LED ground light rated IP65, built around a die-cast aluminium body with a 304 stainless steel bezel and an opal diffuser that casts a 45-degree cone of blue light. The integrated LED driver is housed inside the fitting, eliminating the need for a separate control box, and the unit ships with 1.5m of 230V outdoor-rated 3-core cable pre-attached.
Designed for installation in driveways, garden paths, decking edges and patio borders, the fitting can be recessed into concrete, paving slabs or tarmac using the included plastic mounting sleeve. The sleeve provides a 60mm installation diameter and protects the fitting during installation. Once installed flush with the surface, the light is rated to withstand vehicle traffic up to 800kg at speeds of 5mph, making it suitable for slow-access driveways and courtyard parking. The 62mm outer diameter and 83mm recessed depth fit standard ground light applications.
The 304 stainless steel bezel resists corrosion in exposed outdoor environments and maintains its finish through freeze-thaw cycles, salt exposure and UV degradation. The blue LED output at 15 lumens provides accent lighting rather than functional illumination, typically used to mark pathway edges, highlight architectural features, or add decorative colour to outdoor spaces after dark. The Class I earthing requirement means the fitting must be connected to a mains earth during installation.
Specification
| Diameter |
62 mm |
| Recessed Depth |
83 mm |
| Cut-out Diameter |
50 mm |
| Cut-out with Sleeve |
60 mm |
| Construction |
304 Stainless steel |
| Construction 2 |
& die-cast aluminium |
| Finish |
Stainless Steel |
| Class |
I |
| IP Rating |
IP65 |
| Primary Voltage |
230V 50Hz |
| Cable Length |
1.5 m |
| Diffuser |
Opal |
| Maximum Weight Loading |
800kg at 5mph |
| Lamp Technology |
LED |
| Lamp Included |
Yes |
| Dimmable |
No |
| Beam Angle |
45 |
| Light Colour |
Blue |
| Lumens |
15 lm |
| Wattage |
1.5 |
| Warranty |
3 |
Downloads
Product Specification Sheet
Product Manual
Frequently Asked
Can this light support vehicle traffic?
Yes. When installed using the included mounting sleeve in concrete or tarmac, the fitting is rated for vehicles up to 800kg at speeds of 5mph. This suits slow-access driveways, courtyard parking and gravel drives where occasional vehicle pass-over occurs.
What installation depth is required?
The fitting requires an 83mm recessed depth below the finished surface level. The plastic mounting sleeve provides a 60mm diameter hole for the fitting body and protects the unit during concrete pour or paving installation.
Is the blue LED replaceable?
No. The LED is integrated into the fitting and not user-replaceable. The LED is rated for typical lifespans of 25,000-50,000 hours depending on operating conditions, which equates to 10-20 years of evening-only use.
Can it be used indoors?
Yes. The IP65 rating and Class I construction make it suitable for indoor recessed installation in floors, though it is primarily designed for outdoor ground applications.