Description
The Emberwave is a 90mm recessed ground light with an integrated 3W LED emitting warm white 3000K light through a clear polycarbonate lens. The fitting sits flush with the ground surface, with a stainless steel faceplate finished in grey and a shallow 55mm installation depth. The IP67 rating protects against submersion up to 1m depth, making the fitting suitable for areas prone to standing water or heavy rain.
Designed for pathways, driveways, decking edges and patio perimeters, the Emberwave provides low-level accent lighting to define boundaries and guide foot traffic after dark. The 3W output delivers approximately 200 lumens — enough to mark a path edge without creating glare or light spill into adjacent planting. The walk-over construction withstands pedestrian traffic and vehicle loads up to 1000kg when installed into a stable base, making it suitable for residential driveways as well as garden paths.
The stainless steel construction resists corrosion in coastal and high-humidity environments, while the grey finish blends with most paving materials during daylight hours. Installation requires cutting a 90mm diameter hole into the ground surface, setting the fitting into a gravel or concrete base for drainage, and connecting to low-voltage outdoor cabling. The integrated LED has a rated lifespan of 30,000 hours, equivalent to approximately 10 years of typical evening use.
The non-dimmable LED runs on 230V mains with an integrated driver housed in the fitting body. The clear lens focuses the 3000K light downwards and outwards at approximately 120° beam angle, creating a pool of warm light on the surrounding ground rather than projecting upwards. From Ideal Lux.
Specification
| Diameter (mm) |
90 |
| Height (mm) |
55 |
| Dimmable |
No |
| Number Of Bulbs |
1 |
| Bulb Type |
LED |
| Colour Temperature |
3000K |
| IP Rating |
IP67 |
| Warranty |
5 Years |
Frequently Asked
Can this fitting be driven over?
The Emberwave is walk-over safe and can support vehicle loads up to 1000kg when installed into a properly prepared stable base with adequate drainage. It suits residential driveways and parking areas as well as pedestrian pathways.
What installation depth is required?
The fitting has a 55mm body depth. Installation requires a 90mm diameter hole cut into the ground surface and a stable base of gravel or concrete underneath for drainage and load distribution. The faceplate sits flush with the finished ground level.
Is the IP67 rating suitable for areas with standing water?
Yes. IP67 protects against submersion up to 1m depth for 30 minutes, making the fitting suitable for areas prone to heavy rain, pooling water, or occasional flooding. Ensure the cable entry point is sealed correctly during installation.
How bright is the 3W LED?
The integrated 3W LED delivers approximately 200 lumens of warm white 3000K light. This is designed for path marking and boundary definition rather than area illumination — expect a pool of light roughly 600-800mm in diameter around each fitting.