Description
The Knightsbridge LEDGL3W is a 3W LED recessed ground light with a 92mm diameter 304 stainless steel bezel surrounding a clear lens, integrated 3000K warm white LED, and an aluminium body rated to IP65. The fitting sits flush with the ground surface once installed, projecting just 3mm above the surrounding paving or decking, while the recessed housing extends 94mm below ground level.
Designed for driveways, pathways, patios and decking, the ground light is rated for vehicle loading up to 800kg at 5mph, making it suitable for domestic driveways where cars pass slowly over the bezel. The IP65 rating protects against dust ingress and low-pressure water jets from any direction, so the fitting can be hosed down during patio cleaning or exposed to heavy rain without damage. The integrated LED produces 270lm through a 45-degree beam angle, providing enough light to mark a pathway edge or driveway border without creating glare.
The 304 stainless steel bezel resists corrosion in outdoor conditions and maintains its brushed finish over years of exposure to weather and ground moisture. The fitting requires a 78mm diameter cut-out for installation and ships with a 2m outdoor-rated flex cable for connection to a suitable outdoor driver or junction box. The LED is non-dimmable and has an L70B50 rated life of 50,000 hours at 3000K, giving around 15 years of operation at typical evening pathway lighting durations.
Specification
| Diameter |
92 mm |
| Projection |
3 mm |
| Recessed Depth |
94 mm |
| Cut-out Diameter |
78 mm |
| Cut-out with Sleeve |
78 mm |
| Construction |
304 Stainless steel |
| Finish |
Stainless Steel |
| Class |
I |
| IP Rating |
IP65 |
| Primary Voltage |
230V 50Hz |
| Cable Length |
2 m |
| Diffuser |
Clear |
| Maximum Weight Loading |
800kg at 5mph |
| Lamp Technology |
LED |
| Lamp Included |
Yes |
| Dimmable |
No |
| L70B50 |
50000 |
| Energy Rating (Class) post 2021 SLR |
G |
| Beam Angle |
45 |
| CCT |
3000 K |
| Light Colour |
Warm White |
| Lumens |
270 lm |
| Lumens (Light Source only) |
280 lm |
| Wattage |
3 |
| Efficacy |
76.81 lm/W |
| CRI |
>80 |
| Warranty |
2 |
Downloads
Product Specification Sheet
Product Manual
Frequently Asked
Can this be driven over by a car?
Yes. The fitting is rated for vehicle loading up to 800kg at speeds of 5mph or below, which covers typical domestic driveways where cars pass slowly over the light. It is not suitable for high-speed or heavy commercial vehicle traffic.
Is this suitable for outdoor installation?
Yes. The IP65 rating protects against dust and low-pressure water jets, making it suitable for driveways, pathways, patios and decking exposed to rain and garden hose use. The 304 stainless steel bezel resists corrosion in outdoor conditions.
What installation depth is required?
The fitting requires a 78mm diameter cut-out and a minimum recessed depth of 94mm below the finished surface level. The bezel sits 3mm proud of the surrounding ground once installed. Suitable for installation in concrete, block paving or timber decking with adequate sub-base support.
Is the LED replaceable or dimmable?
The LED is integrated and non-replaceable, with an L70B50 rated life of 50,000 hours. It is non-dimmable and runs at fixed 3000K warm white output on 230V mains.