13A 2 Gang DP Switched Socket Twin Earths - Matt White Screwless (White Insert)

The Knightsbridge 13A 2-gang DP switched socket adds twin earth terminals behind a matt white screwless faceplate with a white insert. The dual-pole switching isolates both live and neutral lines when the socket is switched off, providing additional safety over single-pole switching for high-draw appliances. The twin earth terminals support high-integrity earthing setups required in commercial installations and certain residential applications where supplementary bonding is specified.

Designed for residential, office and commercial installation, the socket fits a standard 25mm minimum back box depth and uses a screwless cover plate that clips onto a separate metal sub-frame. This means there are no visible screws or fixings on the wall once installed, giving a cleaner finish than traditional screw-fixed plates. The 13A rating handles standard UK appliance loads up to 3,120W per outlet. The built-in gasket between the cover plate and sub-frame reduces air gaps and dust ingress.

The matt white finish on premium-grade steel gives a soft, low-reflectance surface that pairs well with white, off-white and neutral-toned interiors. The white insert behind the faceplate hides the back of the cover plate and gives a defined edge to each outlet aperture. The matching metal rockers sit flush with the plate when switched, maintaining the low-profile design. Knightsbridge certifies the socket to BS 1363:2 and backs it with a 25-year warranty.

Product Specification Sheet

Product Manual

What are twin earth terminals used for?

Twin earth terminals provide two separate earth connection points instead of one. This is required in high-integrity earthing setups, certain commercial installations, and where supplementary bonding is specified by Building Regulations or BS 7671 wiring regulations. Most domestic single-dwelling installations use a single earth terminal.

What back box depth is required?

A 25mm minimum back box depth is needed for safe installation. The screwless cover plate adds 4.3mm of projection from the wall once fitted, giving a total wall-to-faceplate depth of approximately 29mm.

Is the screwless plate removable for redecorating?

Yes. The cover plate clips onto a separate metal sub-frame fixed to the back box. The cover can be removed for painting around the socket and re-clipped without re-wiring. The built-in gasket maintains the seal when re-fitted.

What other finishes are available in this range?

Knightsbridge produces this style in a range of finishes including polished chrome, brushed chrome, polished brass, antique brass, matt black and white. Use the search function or filters to find other variants in stock at Niori.