Downlights

Fire-rated downlights and where they matter

If you are fitting downlights into a ceiling that sits below an upstairs room or a loft, fire-rated versions are the ones to reach for. They are built to slow the spread of fire through the holes cut for each fitting, restoring some of the protection lost when the ceiling is breached. Fire-rated designs feature in our range, and you will see them called out clearly in the product titles. For a ground-floor ceiling with nothing habitable above, the requirement is usually relaxed, though many people still choose fire-rated throughout for consistency and peace of mind.

We stock both recessed downlights that sit flush in the ceiling and surface-mounted designs that fix to the surface where cutting a hole is not practical, such as a concrete or already-finished ceiling. Trimless recessed options are also available if you want the fitting to disappear into the plaster with no visible bezel.

CCT switching: one fitting, several colour temperatures

Colour temperature decides whether a room feels warm and relaxed or crisp and alert. Warm white sits around 2700K to 3000K and suits bedrooms, living rooms and hallways. Cool white, closer to 4000K and above, reads cleaner and works well in kitchens, bathrooms and a study or home office. Some of our downlights use CCT switching, which lets you pick the colour temperature on the fitting itself, including a switchable design that covers 3000K, 4000K and 6500K, so you can settle on the right tone after the downlight is installed rather than committing at the point of order. Where you prefer a fixed output, we also stock single colour temperatures, and some models carry a CRI90 rating for more faithful colour rendering on skin tones, food and artwork.

Dimming and bulb type

Plenty of our downlights are dimmable, which is the easiest way to take a bright kitchen ceiling down to a softer evening level. Dimmable performance depends on pairing the fitting with a compatible dimmer, so it is worth checking the two work together before you wire anything in. On bulb type, the range splits between integrated LED downlights, where the light source is built in, and GU10 versions that take a replaceable lamp. Integrated LED keeps the profile slim and the look tidy; GU10 lets you swap the bulb later and change the colour temperature or brightness without replacing the whole fitting. Wattages in the range run from under 10W up to 200W, with lower outputs suited to closely spaced ceilings and higher outputs for rooms that need more punch from fewer fittings. As a rough guide, spacing fittings evenly and keeping them off the very edge of the room gives a more balanced spread than clustering them in the centre.

Fixed, tilt and choosing room by room

Fixed downlights point straight down and are the default for general, even ambient light across a kitchen, hallway or living room. Tilt (also called adjustable) downlights angle the beam, which is useful for washing a wall, picking out a painting or lighting a worktop set back from the ceiling. Think about the job each fitting is doing: rows of fixed downlights for overall light, a few tilt heads where you want to direct attention. In a kitchen, fixed downlights spread across the ceiling cover general light while a line of tilt heads can be angled onto the worktops. In a bedroom or study, warmer fixed downlights suit relaxing and reading, with the option of a tilt head over a desk. For bathrooms, check the fitting suits the zone you are working in. Our indoor downlights are typically IP20 rated, so for porches, eaves and soffits you will want a weatherproof option from our outdoor downlights range instead.

Finishes, shapes and packs

The range comes in round and square profiles and a wide spread of finishes, including white, black and matt black, brass, polished and brushed chrome, gold, copper, nickel and brushed nickel, plus grey finishes and a white plaster design. White and black tend to recede into the ceiling, while metallic finishes read more as a feature. Most designs are compact, single-light fittings with a modern look, and minimalist and industrial styling both feature in the mix. For larger ceilings, multi-packs make it simpler to buy a consistent set in one go, and an emergency battery backup pack is available where you need fittings to stay lit during a power cut. Mixing finishes is fine, but keeping one shape and finish across a room usually looks calmest.