Description
The Helixis is a 150mm square surface-mounted downlight built from powder-coated die-cast aluminium in white, with a frosted tempered glass diffuser set into the underside. The fitting takes a single GU10 bulb (sold separately) and carries an IP54 rating for outdoor use, protecting against dust ingress and water splashes from any direction.
Designed for porches, canopies, building facades and covered walkways, the Helixis mounts directly to a ceiling or soffit surface without recessing. The 150mm cubic form projects 150mm from the mounting surface, giving clearance for the GU10 lamp holder and wiring compartment inside. The frosted glass diffuser softens the light output and prevents direct glare from the bulb when viewed from below.
The white powder-coated finish on the aluminium body resists corrosion and weathering in coastal and urban environments. The die-cast construction gives the fitting structural rigidity and thermal mass to dissipate heat from the bulb, extending lamp life. The 1550mm pre-wired cable allows for flexible installation and connection to existing outdoor wiring, and the fitting is dimmable when paired with a GU10 LED bulb rated for dimming.
Ideal Lux manufactures the Helixis range in Italy and backs this fitting with a 5-year warranty. The 150mm size sits between the smaller 100mm Helixis and larger architectural downlights, providing mid-level output suitable for spacing at 2-3m intervals along a facade or walkway.
Specification
| Length (mm) |
150 |
| Projection (mm) |
150 |
| Cable Length (mm) |
1550 |
| Dimmable |
Yes |
| Number Of Bulbs |
1 |
| Bulb Type |
GU10 |
| IP Rating |
IP54 |
| Warranty |
5 Years |
Frequently Asked
What does the IP54 rating mean for outdoor use?
IP54 protection means the fitting is sealed against dust ingress and can withstand water splashes from any direction. This makes it suitable for covered outdoor areas like porches, soffits and canopies, but not for fully exposed positions subject to direct rainfall or submersion.
Does the fitting come with a bulb?
No. The Helixis takes a single GU10 bulb sold separately. Most users pair it with a 5-7W GU10 LED in warm white (2700K-3000K) for exterior accent lighting, or cool white (4000K) for security and pathway lighting.
Can it be dimmed?
Yes, but dimming depends on the bulb. The fitting itself is dimmable-compatible. Pair it with a GU10 LED bulb rated for dimming and connect to a compatible dimmer switch for full dimming control.
What mounting surface is required?
The Helixis surface-mounts to any solid ceiling or soffit surface using the integral backplate. The 1550mm cable allows routing to a nearby junction box or through the ceiling void to indoor wiring.