Free Delivery on all orders over £99*
Save 30%

Sally LED Round Recessed Trim Downlight - 20W 3000K Black

£7599
RRP £10800
The RRP is the manufacturer's recommended retail price of the item.
218 In Stock - Ready to Ship
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Sally is a 120mm round recessed LED downlight with a 20W integrated COB (Chip on Board) LED at 3000K warm white, set within a black die-cast aluminium trim ring. The fixed-beam fitting recesses into plasterboard or panel ceilings with the black ring sitting flush to the ceiling surface, and the silvery reflector cone angled to direct light straight down or at a slight spread depending on the specific reflector geometry.

Designed for residential living rooms, hallways, bedrooms and commercial hospitality spaces where recessed ceiling lighting is preferred over surface-mounted fittings, the Sally provides general ambient downlighting at 20W draw. The 3000K colour temperature sits in the warm white spectrum, close to traditional halogen output. The IP40 rating protects against solid objects above 1mm but does not carry moisture resistance, so the fitting is for dry interior locations only — not bathrooms, wet rooms or outdoor soffits.

The die-cast aluminium construction gives the trim ring structural rigidity and heat dissipation for the integrated LED, with the black powder-coated finish providing a visible dark accent ring against white or light-coloured ceilings. Installation requires a ceiling void depth of at least 120mm to accommodate the housing, driver and heatsink assembly. The LED is non-dimmable and non-replaceable — the entire fitting is replaced at end-of-life rather than swapping a bulb module.

Specification
Diameter (mm) 120
Height (mm) 120
Dimmable No
Number Of Bulbs 1
Bulb Type LED
Colour Temperature 3000K
IP Rating IP40
Warranty 5 Years
Frequently Asked

Is the Sally dimmable?

No. The integrated 20W LED is non-dimmable. Connecting this fitting to a dimmer circuit may cause flickering, low-level hum, or damage to the driver.

What ceiling void depth is required?

The fitting height is 120mm, which includes the driver housing, heatsink and LED assembly. A ceiling void depth of at least 120mm is needed for safe installation, plus clearance for the mains cable connection above the fitting.

Can it be used in bathrooms?

No. The IP40 rating protects against dust ingress but does not carry moisture resistance. For bathroom zones a fitting with IP44 or higher is required. The Sally is for dry interior locations only.

Can the LED be replaced when it fails?

No. The LED is integrated into the fitting and non-replaceable. At end-of-life the entire fitting is replaced rather than swapping a lamp module. Ideal Lux provides a 5-year warranty on the fitting and driver.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Light source

Integrated LED

Energy-efficient integrated LED, ready to install with no bulbs to buy.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Sally is a 120mm round recessed LED downlight with a 20W integrated COB (Chip on Board) LED at 3000K warm white, set within a black die-cast aluminium trim ring. The fixed-beam fitting recesses into plasterboard or panel ceilings with the black ring sitting flush to the ceiling surface, and the silvery reflector cone angled to direct light straight down or at a slight spread depending on the specific reflector geometry.

    Designed for residential living rooms, hallways, bedrooms and commercial hospitality spaces where recessed ceiling lighting is preferred over surface-mounted fittings, the Sally provides general ambient downlighting at 20W draw. The 3000K colour temperature sits in the warm white spectrum, close to traditional halogen output. The IP40 rating protects against solid objects above 1mm but does not carry moisture resistance, so the fitting is for dry interior locations only — not bathrooms, wet rooms or outdoor soffits.

    The die-cast aluminium construction gives the trim ring structural rigidity and heat dissipation for the integrated LED, with the black powder-coated finish providing a visible dark accent ring against white or light-coloured ceilings. Installation requires a ceiling void depth of at least 120mm to accommodate the housing, driver and heatsink assembly. The LED is non-dimmable and non-replaceable — the entire fitting is replaced at end-of-life rather than swapping a bulb module.

    Specification
    Diameter (mm) 120
    Height (mm) 120
    Dimmable No
    Number Of Bulbs 1
    Bulb Type LED
    Colour Temperature 3000K
    IP Rating IP40
    Warranty 5 Years
    Frequently Asked

    Is the Sally dimmable?

    No. The integrated 20W LED is non-dimmable. Connecting this fitting to a dimmer circuit may cause flickering, low-level hum, or damage to the driver.

    What ceiling void depth is required?

    The fitting height is 120mm, which includes the driver housing, heatsink and LED assembly. A ceiling void depth of at least 120mm is needed for safe installation, plus clearance for the mains cable connection above the fitting.

    Can it be used in bathrooms?

    No. The IP40 rating protects against dust ingress but does not carry moisture resistance. For bathroom zones a fitting with IP44 or higher is required. The Sally is for dry interior locations only.

    Can the LED be replaced when it fails?

    No. The LED is integrated into the fitting and non-replaceable. At end-of-life the entire fitting is replaced rather than swapping a lamp module. Ideal Lux provides a 5-year warranty on the fitting and driver.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.