Free Delivery on all orders over £99*

Audio & AV

Our Audio & AV range covers sound, vision and music: speakers and PA for venues and installations, microphones for stage and studio, amplifiers and mixers, headphones, musical instruments, cables and connectors, TV brackets and aerials, and the cases that carry it all. The sections below split it by what you are trying to do rather than by brand. Found it cheaper elsewhere? We will match the price.

Filter By
  • Featured
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, new to old
  • Date, old to new
208 Products
  • Featured
  • Price, low to high
  • Price, high to low
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Date, new to old
  • Date, old to new

Sound for a venue or an installation

Commercial audio divides on one decision: low impedance or 100V line. For one or two rooms with short cable runs, low impedance speakers wired to an ordinary amplifier are simpler and cheaper. For three or more zones across a building, 100V line puts a transformer in each speaker so many can share one amplifier over long, thin cable without losing level, and it brings zone control and paging with it. Get that decision right first and the rest of the specification follows from it.

Sound for a band, a DJ or an event

A mobile rig is built around speakers, a mixer and microphones. Active speakers have the amplifier built in and need only mains and a signal, which suits anyone loading in alone. Passive cabinets need a separate power amplifier but let you choose how much power you send and expand later. Add a subwoofer before you consider larger tops, because taking the low end off the smaller drivers usually makes the whole system sound louder and cleaner at the same setting.

Recording and streaming

For a spoken voice or a podcast, a cardioid dynamic microphone is often easier to get a good result from than a sensitive condenser, because it plays down room noise and needs less treatment around it. You will also want a stand or boom arm, a pop filter, closed back headphones so the microphone does not hear your monitoring, and an interface or mixer with phantom power if you choose a condenser.

Learning and playing an instrument

Two mistakes account for most abandoned instruments: buying something too large, particularly for children, and neglecting the setup. On a guitar, how high the strings sit above the frets affects whether it gets played far more than the price does. Budget for a setup, buy the smaller size, and remember that amplifiers are not interchangeable between instruments, since a bass through a guitar amplifier sounds thin and can damage the speaker.

Screens, projection and aerials

Mounting a television comes down to the VESA hole pattern on the back of the screen and what the wall is made of, and plasterboard must be fixed into the studs rather than the board. For a much larger image, a projector and screen often costs less than an equivalent television, sized so viewers sit roughly 1.5 to 2.5 times the screen width away. If reception has worsened for no apparent reason, 4G and 5G interference is now a common cause and an in-line filter is the cheapest first thing to try.

Cables, connections and the faults they cause

A large share of audio and video problems are cables rather than equipment. Balanced connections on XLR or TRS survive long runs because noise cancels at the far end, while unbalanced RCA or TS leads collect hum after a few metres. Signal cable and speaker cable are not interchangeable. With HDMI, what matters is meeting the right bandwidth standard rather than the price, and a hum between two connected devices is a ground loop to be cured with an isolator, never by removing an earth pin.

Protecting your equipment

Anything that travels weekly should live in a case. Rack equipment is measured in U, at 1.75 inches per unit, and you should allow a spare U or two for cabling and airflow because a tightly packed rack runs hot. Moulded ABS suits microphones, cables and smaller items, while plywood with aluminium extrusion is stronger and repairable for touring use. Padded bags are the sensible compromise for instruments that only travel between home and rehearsal.

Frequently Asked Questions

Do I need 100V line or low impedance speakers?

One or two rooms with short cable runs, use low impedance, usually 8 ohm. Three or more zones or long runs across a building, use 100V line so many speakers share one amplifier without losing level, with zone control and paging included.

Active or passive speakers?

Active speakers have the amplifier built in and need only mains and a signal, which suits mobile use and quick setups. Passive speakers need a separate power amplifier but let you choose the power and expand the system later.

Which microphone should I buy for recording at home?

A cardioid dynamic is often easier than a condenser in an untreated room, because it rejects more of the space around it. Add a stand or boom arm, a pop filter and closed back headphones, plus phantom power if you do choose a condenser.

Can I use any amplifier with any instrument?

No. Guitar amps colour the midrange, bass amps need far more headroom and a bigger speaker, acoustic amps stay transparent with a mic channel, and keyboard amps are full range. A bass through a guitar amp can damage the speaker.

Which TV bracket fits my television?

The one matching your VESA hole pattern, measured in millimetres across and down the back of the screen, since size alone is not enough. Check the weight rating too, and fix into studs rather than plasterboard alone.

Why do I get a hum when two devices are connected?

It is normally a ground loop, where the pair share both a signal cable and separate mains earths. Use a balanced connection, a DI box with a ground lift, or an isolating transformer. Never remove an earth pin, which is dangerous.

Do you price match?

Yes. If you find any of these items cheaper with another retailer, tell us and we will match the price. Delivery is free on orders over £99.

Our Reviews

From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.