Free Delivery on all orders over £99*

LED Ceiling Lights

LED ceiling lights give a room its base layer of light, and ours run from slim flush fittings that sit tight to the plaster to semi-flush designs with a little drop and linear bars for kitchens and workspaces. We hand-pick integrated LED models in warm, cool and colour selectable outputs, in finishes from matt black to brushed brass. Sizes span compact discs for halls to wide panels for open-plan rooms.

Filter By
  • Featured
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, new to old
  • Date, old to new
1695 Products
  • Featured
  • Price, low to high
  • Price, high to low
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Date, new to old
  • Date, old to new

How to choose an LED ceiling light

Start with the ceiling height, because it decides how much drop you can spare. Under about 2.4 metres, a flush fitting (a flush mount, in US terms) keeps the plane clear and stops taller guests ducking. Above that, a semi-flush with a short stem adds a bit of shape without crowding the room. Next, think about output rather than wattage alone: LED draws far less power for the same brightness, so read the lumen figure if it is listed. As a rough guide, a bedroom wants a gentler wash, while a kitchen or home office needs a stronger, more even spread. Finally, match the diameter to the room. A 35cm disc suits a landing; 60cm to 80cm reads better over a large living space.

Flush, semi-flush and linear shapes

Flush ceiling lights sit directly against the surface and work hard in halls, landings and low-ceilinged bedrooms. Semi-flush models hang a few centimetres clear, which lets light bounce upward as well as down and softens the shadow line around the fitting. Linear bars are the answer over kitchen islands, long dining tables and desks, where a round shape leaves the ends of the run dim. Square and rectangular panels suit modern extensions and utility rooms, and a handful of designs double as wall lights, so you can repeat the same form on two planes. High bay fittings sit at the industrial end, built for garages, workshops and warehouses with tall roofs.

Where each style works, room by room

In a hallway, keep the fitting shallow and centre it between doorways so the beam does not clip an architrave. Bedrooms do well with a warm, diffused flush light on a dimmer, with lamps handling the evening. Kitchens benefit from cooler, brighter light directly over the prep zones, often a linear bar over the island plus a round fitting in the seating area. Bathrooms need a fitting rated for the zone it sits in. In living rooms, treat the ceiling light as the ambient layer and build around it with floor lamps and picture lights. Open-plan spaces usually read best with two or three matching fittings spaced evenly rather than one oversized disc in the middle.

Finishes and materials

Metal frames in matt black, matt white, brushed brass and aged brass cover the bulk of the collection, many paired with an acrylic or opal diffuser that hides the diodes and spreads the light evenly. Black suits industrial and contemporary schemes and holds its own against pale plaster. Brass tones warm a room and sit well with oak and rattan. White disappears into the ceiling, which is exactly what you want when the fitting is purely functional. Wood detailing brings a softer, Scandinavian feel to linear designs. Alabaster shades are carved from natural stone, so the veining differs from piece to piece and the light through them is warm and slightly uneven in the best way.

Colour temperature, dimming and controls

Colour temperature is measured in kelvin. 3000K is a warm white that flatters bedrooms and living rooms; 4000K is a neutral white that keeps kitchens, bathrooms and studies looking crisp; cool white above that suits garages and commercial spaces. Colour selectable fittings let you switch between settings at installation or by remote, which is useful if you are not sure how a room will be used long term. Check dimming before you buy: integrated LED needs a trailing edge LED dimmer, and pairing an old dimmer with a new driver is the usual cause of flicker. Some designs come with a handset for brightness and tone, so no wall switch change is needed.

Looking after your LED ceiling lights

Integrated LED means the diodes are built into the fitting rather than sitting in a replaceable lamp, so there is no bulb to change and the driver does the work behind the diffuser. Most upkeep is dusting. Isolate the power at the wall, let the fitting cool, then wipe the diffuser with a soft dry cloth or one barely damp with water. Avoid solvents and abrasive creams, which cloud acrylic and dull brushed metal. In kitchens, a little washing-up liquid in warm water lifts cooking film from the shade. Stone shades want a dry cloth only, since porous surfaces mark easily. Any hard-wired fitting should be installed by a qualified electrician.

Frequently Asked Questions

What is the difference between a flush and a semi-flush ceiling light?
A flush ceiling light sits directly against the ceiling with almost no gap, which makes it the safer choice for low rooms, hallways and landings. A semi-flush drops a short distance on a stem or spacer, so light spills upward as well as down. Semi-flush designs read as more decorative, but they need a little more headroom.

Do integrated LED ceiling lights have replaceable bulbs?
No. Integrated LED fittings have the diodes and driver built into the body, so there is no lamp to swap out. That keeps the profile slim and the light output even across the diffuser. Rated lifespans typically run into tens of thousands of hours, so the fitting is designed to see out many years of normal use.

How do I work out the right size for my room?
Measure the room in metres, add the two figures together, and treat that number in centimetres as a rough starting diameter. A 3m by 4m bedroom lands around 70cm, though you can go smaller if the fitting is bright and the ceiling is low. For long rooms and kitchen islands, a linear bar usually covers the space better than a single round fitting.

Which colour temperature should I choose?
3000K warm white suits bedrooms, living rooms and dining areas where you want a relaxed tone. 4000K neutral white keeps kitchens, bathrooms, studies and utility rooms looking clean and accurate. Cool white above that is best kept for garages, workshops and high bay applications. Colour selectable models let you choose after installation.

Can LED ceiling lights be dimmed?
Some can and some cannot, so always check the product details before ordering. Dimmable integrated LED needs a compatible trailing edge LED dimmer switch; an older resistive dimmer meant for halogen is the usual reason for buzzing or flicker. Certain designs include a remote handset that controls brightness and colour temperature without changing your wall switch.

What do I need for a bathroom ceiling light?
Bathrooms are divided into zones, and the fitting has to carry an IP rating suitable for the zone it sits in. An IP65 rated flush light is a safe choice for most ceilings above a bath or shower area. Always have bathroom lighting installed by a qualified electrician, and check the rating on the individual product page.

How much is delivery?
We offer free delivery worldwide on all orders over £99, wherever you are ordering from. Orders below that threshold are charged at checkout, where the cost is shown before you pay. Larger ceiling fittings are packed to protect the diffuser and finish in transit, and tracking details follow once the parcel leaves the warehouse.

Related Collections

BestSellers

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    • Free UK Delivery

      Over £99. Ships worldwide.

    • Price Match Promise

      We'll match any like-for-like price.

    • Birmingham Based

      British heritage. Worldwide delivery.

    • Hand-Picked Range

      Beautiful Pieces Selected