Description
The Coin is a 650mm round flush ceiling light with an integrated 100W LED and a sand brown metal rim. The LED panel delivers 6000 lumens at a 120° beam angle, providing ambient room lighting without visible fittings projecting below the ceiling line. The colour temperature is tuneable between 2700K (warm white) and 5000K (cool white) using the supplied remote control, which also dims the output from 100% to near-off.
Designed for living rooms, bedrooms, dining rooms and open-plan spaces where a single ceiling point needs to illuminate a wide area, the Coin sits 70mm proud of the ceiling when surface-mounted. The 650mm diameter suits rooms between 4m-6m wide, delivering general ambient light without the need for additional fittings. The flush design works particularly well in rooms with ceiling heights below 2.4m, where pendant lights would reduce headroom or feel visually heavy.
The sand brown finish is a warm mid-tone metal powder coat that sits between beige and tan, providing a softer alternative to stark white or black frames. The colour reads neutral in most lighting conditions and pairs comfortably with oak, walnut, terracotta and warm grey interior palettes. The tunable white function allows the light temperature to be adjusted for morning tasks (cooler 5000K) or evening relaxation (warmer 2700K) without changing the fitting itself.
The remote control operates the dimming and colour temperature functions within a typical room range of 6-8m, and the fitting draws 100W at maximum output across the full CCT range. Installation requires a single ceiling connection point to mains 230V, and the 2.8kg weight sits within the load tolerance of standard plasterboard ceilings with appropriate fixings. The Coin range comes with a 3-year warranty.
Specification
| Colour Finish 1 |
Sand Brown |
| Diameter |
650mm |
| Height |
70mm |
| Number Of Bulbs |
1 |
| Lamp Socket |
Integrated LED |
| Colour Temperature |
2700 - 5000K Tuneable White |
| Beam Angle |
120° |
| Lumen |
6000lm |
| Power Consumption |
100W |
| Voltage |
220-240V~50/60Hz |
| Dimmable |
Yes - Remote Control |
| Weight |
2.8KG |
| Warranty |
3 Year |
Frequently Asked
How is the colour temperature adjusted?
The supplied remote control has CCT buttons that shift the LED between 2700K (warm white) and 5000K (cool white). The transition is stepless, allowing you to set any colour temperature within that range. The remote operates from approximately 6-8m in typical room conditions.
What room size does the 650mm fitting suit?
The 6000lm output and 120° beam angle provide general ambient lighting for rooms between 4m-6m wide (approximately 16-36m² floor area). Smaller rooms may find the light too bright at full output; larger open-plan spaces may benefit from a second fitting or supplementary task lighting.
Is it suitable for low ceilings?
Yes. The 70mm projection makes it a good choice for rooms with ceiling heights below 2.4m, where pendant lights would reduce headroom. The flush design keeps the visual mass close to the ceiling plane.
Can it be installed on plasterboard ceilings?
Yes, provided appropriate cavity fixings rated for 2.8kg are used. The fitting requires a single mains connection point to 230V. If the ceiling rose sits over a joist or batten, standard woodscrews are sufficient.