Description
The driver is not included, and neither is the recessed base. This is the Sunset LED engine on its own: the light source that drops into a Sunset base and runs from a 1000mA Sunset driver. Both are bought separately: the drivers that suit it are on/off, triac dimmable or DALI or push, and it seats in the 21.5cm recessed base, which comes in white, black or gold.
This is the light source itself: a black LED engine that drops into a Sunset recessed base for a clean, quiet ceiling. A 40W engine gives warm white light at 3000K, and the beam is wide enough to wash a room rather than pick out a single spot. Colour rendering is high, so timber, paint and food all read properly. We reach for it where a ceiling should give light and very little else to look at.
It works well over kitchen worktops and islands, in open-plan living rooms, and along wider hallways where a run of them keeps the ceiling calm. The warm tone sits kindly on plaster, brick and oak, and it is easy to live with late in the evening. A driver is needed and is bought separately; pair it with a dimmable driver and the level can be brought down, otherwise it simply runs at full output. Keep it to dry rooms indoors, away from steam and splashing, since shower zones and open porches want something properly sealed.
The finish is black, which lets the engine settle back into the ceiling rather than draw the eye, and the construction is double insulated. It carries a five year warranty. For cleaning, switch off at the wall and let things cool, then lift dust from the face with a dry brush or a lens cloth; keep sprays and solvents away from the optic altogether. We stock the matching recessed bases in black, gold and white, in a spread of aperture sizes, so a hallway of small apertures and a kitchen of larger ones can still read as one scheme.
Specification
| Colour |
Black |
| Weight |
0.70KG |
| Diameter |
215mm |
| Height |
152mm |
| Materials Used |
Aluminium |
| Energy Class |
G |
| Max Energy Class |
G |
| Min Energy Class |
G |
| Lamp Cap |
Integral LED |
| Recommended Lamp |
Integral LED |
| Lamps Included |
Yes - Integrated |
| Colour Temperature |
3000K Warm White (±5%) |
| LED Power |
40W (±5%) |
| LED Current |
1000mA (±5%) |
| Lumens per Watt (lm/W) |
80lm/W (±5%) |
| Beam Angle |
50° |
| System Flux |
3215lm (±5%) |
| CRI |
>90 |
| Driver Included |
No |
| Protection Class |
Class 2 - Double Insulated |
| Total Power Consumption |
40W (±5%) |
| Input Current |
1000mA |
| Dimmable |
Yes - Dimmable Driver Required |
| IP Rating |
IP20 |
| Warranty |
5yrs |
| UKCA/CE |
Yes |
| EMV/EMC |
Yes |
| Heat Sink Colour |
Black |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Country of Origin |
China |
Frequently Asked
Is the driver included?
No. The engine draws 40W and needs a 1000mA Sunset driver, sold separately: on/off, triac dimmable or DALI or push. It also needs the 21.5cm Sunset recessed base to sit in, in white, black or gold.
How much light does it give out?
3215 lumens at 3000K warm white, drawn from a 40W integral LED engine, with colour rendering above 90 so colours stay true.
What size is it?
215mm across and 152mm deep, weighing 0.7kg. The matching Sunset base at this size takes a 200mm cut out.
Is anything else required to run it?
Yes. The driver is not included, and the engine is made for use with a Sunset recessed base, which is ordered separately.
Can the light be dimmed?
It can, provided a dimmable driver is used. With a standard non-dimmable driver it runs at full output only.
How wide is the beam?
50 degrees, which spreads light across a room rather than concentrating it into a narrow pool.
How should it be cleaned?
Isolate the power, allow it to cool, then remove dust from the face with a soft dry brush or lens cloth. No solvents or aerosol cleaners.