Description
The Zinta is a 2-light crystal wall light built around a polished chrome circular backplate, with two scrolling chrome arms that support crystal sconces, cut crystal droplets and a central crystal block. Each arm holds an E14 candle bulb (sold separately, maximum 60W per bulb), positioned within a faceted crystal cup that acts as a reflector. Asfour crystal spheres hang from each arm and from the base of the central assembly, with additional crystal droplets suspended from the scrollwork above the bulbs.
Designed for hallways, living rooms and dining rooms where decorative wall lighting is needed alongside a functional light source, the Zinta includes an integrated pull-cord switch on the front face, allowing the light to be controlled without needing a wall switch. The 210mm projection from the wall positions the light source forward of the mounting surface, casting light both upward and downward. The polished chrome finish reflects light across the surrounding crystal, amplifying the sparkle when the bulbs are lit.
The fitting measures 320mm wide and 330mm tall, making it suitable for wall spaces between furniture, alongside mirrors, or in pairs flanking a fireplace or entrance. The central crystal block is a solid faceted piece that adds weight to the composition and refracts light through its internal cuts. The Zinta is dimmable when paired with dimmable E14 bulbs and a compatible dimmer switch upstream of the pull-cord. The chrome and crystal combination suits traditional, transitional and classical interiors where decorative metalwork is a feature.
Specification
| Colour Finish 1 |
Polished Chrome |
| Width |
320mm |
| Height |
330mm |
| Projection |
210mm |
| Number Of Bulbs |
2 |
| Lamp Socket |
E14 |
| Max Wattage |
60W |
| Lamp Included |
No |
| Power Consumption |
Dependent On Lamps Used |
| Voltage |
220-240V~50/60Hz |
| Dimmable |
Yes - Dimmable Lamps Required |
| Weight |
2KG |
| Warranty |
1 Year |
Frequently Asked
What bulbs does the Zinta take?
The Zinta uses two E14 small Edison screw candle bulbs, maximum 60W each. Bulbs are sold separately. Most users pair this with 4-6W LED candle bulbs in warm white (2700K-3000K) for a traditional glow that complements the crystal.
Is the integrated switch a requirement or can it be wired to a wall switch?
The pull-cord switch is integrated into the front of the fitting and cannot be removed. The fitting can still be controlled by an upstream wall switch if preferred, with the pull-cord left in the 'on' position. This allows the wall switch to control power to the light.
Is it dimmable?
Yes, when paired with dimmable E14 bulbs and a compatible trailing-edge or leading-edge dimmer switch installed upstream of the pull-cord. The pull-cord itself is not dimmable, so dimming must be controlled by a separate wall-mounted dimmer.
How is the crystal cleaned?
Switch off and allow the bulbs to cool. Wipe each crystal piece with a dry, soft microfibre cloth. For stubborn marks, a barely-damp cloth with distilled water is acceptable. Do not use glass cleaners, sprays or polishes on Asfour crystal as they can leave residue in the facets.