Description
The Wiressa is a flush ceiling light built as a long wooden beam, held at each end by black steel brackets finished with two round bolt heads. A black steel channel runs the length of its underside and carries four E27 lampholders in a neat row, so the light falls along the whole beam. It measures 76cm long, 8.5cm wide and 10cm high, which keeps it close to the ceiling and suits rooms where a hanging pendant would feel low. Each lampholder takes a bulb of up to 60W, and the bulbs are not included, so you choose the colour and warmth yourself. It is rated IP20, which means it belongs indoors in a dry room.
We see it working best above a living room bookcase or a dining table, or along a hallway, anywhere a long, narrow shape can follow the line of the room. The warm brown woodgrain against matt black brings a rustic, workshop feel that sits comfortably with exposed brick and natural textures, and it pairs well with clear filament bulbs whose glass shows the glowing wire. Because the light comes from four lampholders spread along the beam, it reaches the length of a long table or a run of shelves, rather than pooling in one spot.
The body pairs wood with steel: the timber beam brings the warmth, while the black steel brackets and channel give it structure and carry the lampholders. There is no switch on the light itself, as it is switched at the wall and works from the light switch you already have. It runs on 220-240V, 50/60Hz mains, and as a wired-in ceiling light it is installed by a qualified electrician. The installation instructions come as a download, and it weighs 2.68KG packed. When you buy bulbs, choose four E27 bulbs of 60W or less; clear globe filament bulbs show the beam at its best.
Specification
| Length |
76cm |
| Width |
8.5cm |
| Height |
10cm |
| Body Material |
Wood, steel |
| Body Colour |
Brown, black |
| Light Source |
E27 (bulb not included) |
| Wattage |
Max 4 x 60W |
| Switch |
None (switched at the wall) |
| IP Rating |
IP20 |
| Protection Class |
Class II |
| Voltage |
220-240V, 50/60Hz |
| Weight (packed) |
2.68KG |
Downloads
Installation Instructions (PDF)
Frequently Asked
Can I fit this ceiling light in a bathroom?
No. It is rated IP20, which means it is made for dry indoor rooms such as a living room, dining room or hallway, and not for bathrooms or anywhere near water.
Does it come with bulbs?
No, the bulbs are not included. It takes four E27 bulbs of up to 60W each, so you can choose the colour and style of light you prefer.
How big is the Wiressa ceiling light?
It is 76cm long, 8.5cm wide and 10cm high, so it sits close to the ceiling and suits a long table, a bookcase or a hallway.
How is the light switched?
There is no switch on the light itself. It is switched at the wall, so it works from the light switch you already have in the room.
What materials does the body use?
The body combines a brown wooden beam with black steel brackets and a black steel channel, which carries the four lampholders along its underside.