Description
Our Vertical and Diagonal Ribs design splits the square along its diagonal, from top left to bottom right. In the lower-left half, broad vertical ribs step down in height from left to right, their angled tops meeting the diagonal, while narrower ribs run parallel to that diagonal across the upper-right half. Each rib is a sharp-edged prism with one face catching the light and the other falling into shade, and a narrow flat border frames the panel. These 3D wall panels are white PVC, each a 50cm square with a relief 30mm deep, enough for every rib to throw a crisp shadow.
The panels suit interior walls in homes, offices, hotels and shops, and a feature wall is where they come into their own: behind a sofa or a bed, or behind a desk or reception counter. Because the two halves of each square run in different directions, a wall of them builds a lively rhythm of upright and slanting lines. Light from a window or a wall washer to one side gives the boldest stripes of light and shade, while softer, even light from overhead turns the same wall into a quieter texture, so the look changes through the day.
Each panel is formed from a 0.8mm sheet and is fixed with adhesive spread across its back, then pressed onto the wall. Panels can be cut to fit at the edges of the wall, and once they are up the joins are filled with filler and wiped clean, with no special equipment needed. Adhesive and filler are sold separately. Being waterproof, the panels need little more than a wipe with a damp cloth to stay fresh. Four panels cover one square metre, which makes it simple to work out how many a wall needs. For a calm finish, keep the rest of the room plain, with soft textiles or warm wood, so the ribs stay the focus.
Specification
| Pattern |
Vertical and Diagonal Ribs |
| Colour |
White |
| Material |
PVC |
| Panel Size |
50 x 50cm |
| Relief Depth |
30mm |
| Sheet Thickness |
0.8mm |
| Coverage Per Panel |
0.25m² |
| Fixing |
Adhesive (Sold Separately) |
| Joins |
Filler (Sold Separately) |
| Suitable For |
Interior Walls |
Frequently Asked
What does the Vertical and Diagonal Ribs pattern look like?
The square is divided along its diagonal. Broad upright ribs step down in height across the lower-left half, and narrower ribs run parallel to the diagonal across the upper-right half, each with a light face and a shaded face.
How big is each panel and how much wall does it cover?
Each panel is 50 x 50cm, and four of them cover one square metre, which helps you work out how many your wall will take.
How are the panels fixed to the wall?
You spread adhesive over the back of each panel and press it onto the wall, then fill the joins with filler and wipe them clean for a neat finish.
What else do I need to fit the panels?
You will need a suitable adhesive for the backs and some filler for the joins, and both of these are sold separately. No special equipment is needed for the job.
Can I cut the panels to fit my wall?
Yes, each panel can be cut to fit, so you can trim the panels at the edges and carry the pattern right across your wall.
How do I clean the panels?
The PVC is waterproof, so a wipe with a damp cloth is all it takes to keep them clean, and they need very little upkeep.