Description
Our Undulating Ribs 3D wall panels are covered with rounded ribs that lie side by side and run from one edge of the panel to the other. Each rib swells and narrows along its length, so the ribs bend in gentle, irregular curves, some broad and some slim, like a slow wave moving through the wall. They stand proud in a relief 11mm deep, with soft shadows gathering in the grooves between them. Each panel is a white PVC square measuring 50 x 50cm.
These panels suit interior walls in homes, offices, hotels and shops, and make a good feature wall behind a bed, a sofa or a reception desk. In flat, even light the ribs look quiet and soft; when light falls across them from the side, from a window or a low wall light, the shadows in each groove deepen and the curves stand out clearly. Fit them with the ribs running up the wall to draw the eye upward, or turn each panel on its side so the ribs run across in a long, easy line that suits a wide wall or a corridor.
Each panel is formed from a 0.8mm sheet, and PVC is waterproof. To fit, spread adhesive on the back of each panel and press it onto the wall; no special equipment is needed. They cut to fit at the edges of a wall, and the joins are filled with filler and wiped clean so they sit neatly. Adhesive and filler are sold separately. Four panels cover one square metre, which makes it easy to work out how many a wall needs. On the wall, they wipe clean with a damp cloth and need very little looking after. For the best of the pattern, keep the space in front of the wall simple and set a lamp to one side to pick out the curves.
Specification
| Pattern |
Undulating Ribs |
| Colour |
White |
| Material |
PVC |
| Panel Size |
50 x 50cm |
| Relief Depth |
11mm |
| Sheet Thickness |
0.8mm |
| Coverage Per Panel |
0.25m² |
| Fixing |
Adhesive (Sold Separately) |
| Joins |
Filler (Sold Separately) |
| Suitable For |
Interior Walls |
Frequently Asked
What does the Undulating Ribs pattern look like?
It is a run of rounded, raised ribs lying side by side. Each one swells and narrows along its length, so the lines bend in gentle, irregular curves.
How big is each panel and how much wall does it cover?
Each panel is a 50 x 50cm square, and four of them cover one square metre, so measure your wall first to work out how many you need.
How are these 3D wall panels fitted?
Spread adhesive across the back of each panel and press it onto the wall, cutting panels to fit at the edges. Then fill the joins with filler and wipe them clean. No special equipment is needed.
Do I need to buy anything else to fit them?
Yes. You will need adhesive to fix the panels and filler for the joins, and you buy both of these on their own, apart from the panels.
Where can I use these wall panels?
They are made for interior walls in homes, offices, hotels and shops, and they work especially well as a feature wall behind a bed, a sofa or a reception desk.
How do I clean the panels?
Wipe them over with a damp cloth whenever they need it. PVC is waterproof, and the panels need very little maintenance once they are on the wall.