Description
A small rectangular outdoor wall light, squared off and plain, with a clear lens set into the open face. At 68mm across it is one of the more discreet exterior fittings we sell, and the shallow projection keeps it tucked against the wall rather than standing proud of it. A single GU10 lamp sits behind the lens, taking up to 50W, and the light is thrown as a defined wash rather than a broad spread. It arrives unswitched, so control stays with the circuit it runs on.
We put this one to work at front and back doors, beside garage doors, along side passages and on garden walls where a lantern would look heavy. It handles steps and thresholds well, and sits quietly in a run along a longer boundary wall. It is rated for outdoor use in rain and windblown dust, so an open porch or an exposed elevation suits it. We would choose an LED reflector lamp for it; if you want the light on a dimmer, the lamp itself has to be a dimmable one.
The finish is a fine matt sand black, low in sheen and forgiving of weather, and the clear lens leaves the lamp in view. Upkeep is a seasonal job: wipe the body over with a damp cloth, dry it off, then clear cobwebs and grit from the lens so the output stays where you aimed it. It carries a two year warranty. The same range gives you a curved body if you prefer softer edges, and a sand white finish for pale render and light brickwork. Lamps are not included.
Specification
| Colour |
Sand Black |
| Ceiling Mountable |
Yes |
| Weight |
0.39KG |
| Width |
68mm |
| Height |
100mm |
| Projection |
78mm |
| Materials Used |
Aluminium Die-Casting Body, Glass Diffuser |
| Energy Class |
A++ to D |
| Max Energy Class |
A++ |
| Min Energy Class |
D |
| Lamp |
1 x GU10 50W max (lamps not included) |
| Lamp Cap |
GU10 |
| Recommended Lamp |
LED (50mm Reflector) |
| Light Distribution |
Single Direction |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption (W) |
Dependent On Lamps Used (±5%) |
| Input Voltage (V) |
220-240V~50/60Hz |
| Switch |
Not Switched |
| Dimmable |
Yes - Dimmable Lamps Required |
| IP Rating |
IP54 |
| Warranty |
2yrs |
| UKCA/CE |
Yes |
| Shade Colour |
Clear |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Ensure light is not illuminated when cleaning. (2) Remove dirt with a damp cloth, do not use any detergents, do not clean with any pressurised water. |
| Country of Origin |
China |
Frequently Asked
What lamp should I use in it?
It takes one GU10 lamp with a maximum rating of 50W. We would fit an LED reflector of the 50mm type, which is the recommended lamp for this fitting.
Can I dim it?
Only if the lamp you fit is a dimmable GU10 and the circuit has a suitable dimmer. The fitting itself carries no switch or control.
How far does it stand off the wall?
Projection is 78mm, with a height of 100mm and a width of 68mm, so it stays compact beside a door frame or window reveal.
Is it suitable for an exposed wall?
Yes. It is IP54 rated, which covers rain and windblown dust, so it copes with an open porch, a garden wall or an exposed elevation.
How do I keep the finish looking right?
A damp cloth and a dry off is usually enough. Avoid abrasive creams and solvents on the sand black finish, and keep the lens clear so light output is not dulled.
What else is in this range?
There is a curved version alongside this rectangle, and both shapes are offered in sand white as well as sand black.