Description
A compact curved body in sand black, with clear glazing to the front, this is one of the smaller outdoor wall lights we sell. It takes a single GU10 lamp, which means you choose the beam and the warmth yourself, up to 50W. The fine textured black keeps the outline crisp against brick, render or timber while staying quiet in daylight, and the shallow projection means it sits close to the wall rather than jutting into a path.
Sheltered spots suit it best: a porch, a back door, the passage between house and garage, a garden wall where you want light without bulk. It is sealed against dust and splashing water, so rain thrown onto the wall is no trouble. There is no switch on the fitting itself, so it runs from a switch indoors or from a lighting circuit already in place, and a dimmable lamp opens up dimming where the circuit allows. We tend to reach for it in pairs, one either side of a door, in places where a lantern would look heavy.
The housing wears a fine matt sand texture that hides fingermarks and rain spotting, with clear glazing at the face. To keep it looking well, wipe the body and the glass with a damp cloth and dry it off, doing so a little more often near the coast where salt gathers on the finish. It carries a two year warranty. The range runs to a rectangle body as well as this curve, and both shapes are offered in sand white if black would read too hard against pale render. Lamps are not included, and a reflector LED is the sensible choice here.
We stock the curved and rectangle shapes side by side, so a run of doors and outbuildings can be matched up without mixing makes.
Specification
| Colour |
Sand Black |
| Ceiling Mountable |
Yes |
| Weight |
0.35KG |
| Width |
68mm |
| Height |
100mm |
| Projection |
78mm |
| Materials Used |
Aluminium Die-Casting Body, Glass Diffuser |
| Energy Class |
A++ to D |
| Max Energy Class |
A++ |
| Min Energy Class |
D |
| Lamp |
1 x GU10 50W max (lamps not included) |
| Lamp Cap |
GU10 |
| Recommended Lamp |
LED (50mm Reflector) |
| Light Distribution |
Single Direction |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption (W) |
Dependent On Lamps Used (±5%) |
| Input Voltage (V) |
220-240V~50/60Hz |
| Switch |
Not Switched |
| Dimmable |
Yes - Dimmable Lamps Required |
| IP Rating |
IP54 |
| Warranty |
2yrs |
| UKCA/CE |
Yes |
| Shade Colour |
Clear |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Ensure light is not illuminated when cleaning. (2) Remove dirt with a damp cloth, do not use any detergents, do not clean with any pressurised water. |
| Country of Origin |
China |
Frequently Asked
Which lamp does it take?
One GU10 lamp, rated up to 50W. An LED reflector lamp with a 50mm head is the recommended choice. Lamps are supplied separately.
Can it be dimmed?
Yes, provided you fit a dimmable GU10 lamp and pair it with a compatible dimmer on the circuit. The fitting has no switch of its own.
How big is it on the wall?
It measures 68mm wide and 100mm high, with a projection of 78mm, so it stays tight to the wall in narrow passages.
Is it suitable for an exposed wall?
It has an IP54 rating, which covers dust and splashing water. A wall with some shelter from a canopy or eaves will keep the glazing cleaner for longer.
How should I clean it?
Switch the power off at the circuit and let the lamp lose its heat, then wipe the housing and glazing with a damp cloth and dry them. Avoid abrasive creams, which dull the sand texture.
What finishes are available?
This one is sand black, and we also stock the curved body in sand white.