Tiffany 3 Light Crystal Floor Lamp - Antique Brass with White Shade

The Tiffany is a 1750mm floor lamp built around an antique brass stem with three upward-facing E27 bulb holders set within a circular brass frame, topped by a 500mm white organza shade. Cascading strands of precision-cut crystal droplets hang from each bulb position, catching and refracting light through the translucent shade above. The combination of antique brass, white organza and crystal creates a three-layer light effect: direct uplight from the bulbs, diffused glow through the white shade, and reflected sparkle from the crystal strands.

Designed for living rooms, dining areas and primary bedrooms where both ambient and decorative lighting are needed, the Tiffany suits spaces with ceiling heights of 2.4m or above. The 500mm shade diameter provides enough light spread for a 3-4m room without overwhelming smaller lounges. The lamp stands on a circular antique brass base with a footprint of approximately 250mm, giving stability on carpets and hard floors. The three E27 sockets take standard bulbs up to a combined wattage determined by the lamp holder rating, and the fitting is dimmable when paired with appropriate dimmable LED or halogen bulbs and a compatible dimmer.

The antique brass finish on the stem and frame shows a darker, aged patina compared to polished or brushed brass, with subtle tonal variation across the surface that pairs well with warm wood furniture, jewel-toned upholstery and traditional or transitional interiors. The white organza shade is semi-translucent, allowing the light to pass through while hiding the bulbs and internal framework from view. Each crystal strand is individually suspended and moves slightly when the lamp is positioned, adding a kinetic quality to the piece when installed in rooms with air movement.

What bulbs does the Tiffany take?

The lamp takes three E27 (Edison screw) bulbs, sold separately. Most users pair this with warm-white LED bulbs between 6-10W each and 2700K-3000K colour temperature for living room or bedroom use. Check the maximum wattage rating on the lamp holder label inside the fitting before installing bulbs.

Is it dimmable?

Yes, when paired with dimmable bulbs and a compatible dimmer switch. Standard non-dimmable LED bulbs will not dim correctly and may flicker or fail. Use bulbs marked as dimmable and ensure your dimmer is rated for LED if using LED bulbs.

How stable is the base?

The circular brass base has a footprint of approximately 250mm and the lamp weighs 9.2kg, providing stability on most surfaces. The weight is distributed between the base and the brass stem, so the lamp can be positioned on carpets and rugs without tipping under normal use.

Can the shade and crystals be cleaned?

The white organza shade can be dusted with a soft dry cloth or vacuumed gently on a low setting using a soft brush attachment. The crystal droplets can be wiped individually with a barely-damp microfibre cloth. Switch off and unplug the lamp before cleaning and allow crystals to dry fully before switching back on.