Tiffany 1 Light Crystal Wall Light With Switch - Antique Brass With Cream Shade

The Tiffany is a one-light wall light with an antique brass rectangular backplate, a cream pleated fabric shade, and faceted crystal droplets suspended from the arm. A single E14 bulb sits inside the shade, and light passing through it picks out the cascading crystals below. An integrated rocker switch on the backplate allows the light to be controlled without returning to the main wall switch.

Designed for bedrooms, hallways and living rooms where task lighting and ambient glow are both needed, the Tiffany works well either side of a bed as a reading light with in-reach switching, or in hallways and staircases where wall space is limited but independent control is useful. The 190mm projection from the wall and 450mm total height suit standard-width hallways and alongside furniture without blocking passage. The integrated switch eliminates the need for pull-cord or remote dimming systems.

The antique brass finish shows a warm golden tone with subtle darkening that suggests age, pairing well with traditional and transitional interiors that lean towards warmer palettes. The pleated cream shade softens the bulb's output and prevents glare, while light spilling below the shade catches the hanging crystals and throws refracted patterns onto adjacent walls. The crystals themselves are faceted glass rather than acrylic, giving sharper light dispersion when lit.

A dimmable E14 bulb on a compatible dimmer extends the range from bright reading light to a low evening glow. A 3-5W LED at 2700K to 3000K suits the warm brass finish, while the 1.3kg weight sits comfortably on standard plasterboard fixings and keeps the backplate flush against the wall.

Does it come with bulbs?

No, bulbs are sold separately. The Tiffany takes one E14 bulb, in the socket inside the shade. We suggest pairing this with warm-white LED candle bulbs between 3-5W and 2700K-3000K.

Is the integrated switch dimmable?

The integrated rocker switch is on/off only. To achieve dimming, you would need to pair dimmable E14 LED bulbs with a compatible dimmer on the main wall circuit controlling the light. The switch on the fitting itself does not dim.

How is the cream shade cleaned?

The pleated fabric shade can be dusted gently with a soft brush or dry microfibre cloth. For deeper cleaning, remove the shade from the fitting and use a barely-damp cloth with mild detergent, then allow to air-dry fully before refitting. Avoid soaking the fabric.

What projection from the wall does it need?

The Tiffany projects 190mm from the wall once fitted. This suits most hallways and bedside positions, but check clearance if installing next to wardrobes, headboards or other furniture that might restrict access to the switch.