Staggered Brick Strips 3D PVC Wall Panels 50 x 50cm - White

Our Staggered Brick Strips 3D wall panels lay smooth, flat-faced bars and blocks in nine horizontal rows, with the ends of each row staggered against the next and patches of plain background left open between them. Some rows pair a taller block with a shorter one end to end, so the layout looks loose and random, like brickwork pulled apart into strips. Each bar stands crisply from a flat ground in a relief 10mm deep, with clean edges and small steps where blocks meet. The panel is white PVC, a 50 x 50cm square, and the pattern fills it once, so it repeats panel by panel across the wall.

They suit interior walls in homes, offices, hotels and shops, and they work well as a feature wall behind a bed, a sofa, a reception desk or a shop counter. Because the bars stand only a little proud of the ground, they throw narrow, defined shadows, so the wall stays calm head on and the brick lines sharpen as daylight or a wall light rakes across from the side. The gaps between the strips stop the rows reading as rigid stripes, giving the wall a relaxed, modern rhythm that sits happily with plain furniture, timber and soft textiles.

Each panel is formed from a 0.8mm PVC sheet, and PVC is waterproof. Fitting needs no special equipment: spread adhesive on the back of the panel, press it onto the wall, cut panels to fit at edges and corners, then fill the joins with filler and wipe them clean. Adhesive and filler are sold separately. When working out how many a wall needs, four panels cover one square metre. Afterwards they are low maintenance, needing only a wipe with a damp cloth. Start fitting from a level line near the floor and run panels into the corners so the staggered strips read as one continuous surface.

What does the Staggered Brick Strips pattern look like?

Flat-faced bars and blocks run horizontally in nine rows with staggered ends and plain gaps between them, giving a loose brick look that repeats panel by panel.

How big is each panel and how much wall does it cover?

Each panel is a 50 x 50cm square, so four panels cover one square metre, which makes it simple to work out your quantity.

How are the panels fixed to the wall?

Spread adhesive across the back of each panel and press it firmly onto the wall. No special equipment is needed, so fitting is a straightforward job.

Do the panels come with adhesive and filler?

No. Neither the adhesive nor the filler comes with the panels, so you will need to buy both before you start fitting.

Can I cut the panels to fit around edges and corners?

Yes, the PVC panels can be cut to fit, and the joins are then filled with filler and wiped clean for a neat finish.

How do I keep the panels clean?

They are low maintenance: a wipe with a damp cloth is all they need to keep the white brick strips looking fresh.