Description
Our Square in Diamond 3D wall panels set a large raised square with softly rounded corners upright in the centre of each panel, its corners just meeting a diamond outline of four narrow diagonal bars with rounded ends. The bars run out towards the edges and stop short of one another at the diamond's points, leaving small gaps at the middle of each side. The relief is 15mm deep, enough for the flat square and the slim bars to cast clear shadows when light comes from the side. Each panel is a 50cm square of white PVC.
These panels are made for interior walls in homes, offices, hotels and shops. Fitted as a feature wall behind a bed, a sofa or a reception desk, the repeat of squares and diamonds runs right across the surface, and it changes with the light through the day: soft, even light gives a calm, quiet texture, while a lamp or window to one side picks out every edge of the relief. In a hotel corridor or a shop, a single panelled wall gives a plain space a clear focal point. Four panels cover one square metre, which keeps it simple when working out how many a wall needs.
The panels are made from a 0.8mm sheet. To fit them, spread adhesive on the back of each panel and press it onto the wall, cut panels to fit where the run meets a corner or ceiling, then fill the joins with filler and wipe them clean; no special equipment is needed. Adhesive and filler are sold separately. They are waterproof and low maintenance, so a wipe with a damp cloth keeps the relief clean. For a tidy finish, start the first row at the centre of the wall so any cut panels sit evenly at both ends, and keep what stands in front of it plain so the pattern stays clear.
Specification
| Pattern |
Square in Diamond |
| Colour |
White |
| Material |
PVC |
| Panel Size |
50 x 50cm |
| Relief Depth |
15mm |
| Sheet Thickness |
0.8mm |
| Coverage Per Panel |
0.25m² |
| Fixing |
Adhesive (Sold Separately) |
| Joins |
Filler (Sold Separately) |
| Suitable For |
Interior Walls |
Frequently Asked
What does the Square in Diamond pattern look like?
A large raised square with softly rounded corners sits upright in the middle of each panel, its corners touching a diamond outline of four slim bars with rounded ends and small gaps at the diamond's points.
How big is each panel and how much wall does it cover?
Each panel measures 50 x 50cm, and four of them cover one square metre of wall, which makes working out your order straightforward.
How are these 3D wall panels fixed to the wall?
You spread adhesive across the back of each panel, press it onto the wall, cut panels to fit where needed, then fill the joins with filler and wipe them clean.
Do I need to buy anything else to fit them?
Yes, you will need adhesive to fix the panels and filler to finish the joins, and both are bought separately from the panels. No special equipment is needed for fitting.
Where can I use these panels?
They are made for interior walls in homes, offices, hotels and shops, and they work especially well across a feature wall where light falls from one side.
How do I keep the panels clean?
The PVC is waterproof, so a wipe with a damp cloth is all the panels need, and they are low maintenance from day to day.