Description
Our Spiral and Corner Arcs 3D wall panels are built around a single spiral of rounded raised ribs that coils out from the middle of each panel. Its outer turns break off short of one corner, where a nest of quarter-circle arcs centred on that corner fills the gap, and each of the other three corners holds a pair of small arcs. The ribs are tube-like, with gaps of about their own width between them, and stand clearly proud of a flat ground in a relief 12mm deep. The panels are white PVC, each a 50cm square, and four panels cover one square metre, which helps when working out how many a wall needs.
They are made for interior walls in homes, offices, hotels and shops, and they suit a feature wall behind a bed, a sofa or a reception desk. The rounded ribs give soft, moderate shadows rather than hard lines, so the pattern stays calm up close. Where light falls across the wall from one side, from a window or a wall lamp, the curves pick up gentle bands of shade and the spirals stand out; under flat overhead light the relief reads quieter. Fitted in rows, the spirals repeat across the wall in a steady rhythm, with the corner arcs sitting at each join.
Each panel is formed from a 0.8mm PVC sheet. Fitting needs no special equipment: spread adhesive on the back of the panel and press it onto the wall, and cut panels to fit where the wall ends. When the wall is covered, fill the joins with filler and wipe them clean. Adhesive and filler are sold separately. The PVC is waterproof and wipes clean with a damp cloth, so the wall needs little upkeep. For styling, keep what sits in front of it simple and let one wall of spirals carry the room, with plain walls around it.
Specification
| Pattern |
Spiral and Corner Arcs |
| Colour |
White |
| Material |
PVC |
| Panel Size |
50 x 50cm |
| Relief Depth |
12mm |
| Sheet Thickness |
0.8mm |
| Coverage Per Panel |
0.25m² |
| Fixing |
Adhesive (Sold Separately) |
| Joins |
Filler (Sold Separately) |
| Suitable For |
Interior Walls |
Frequently Asked
What pattern does this wall panel have?
A spiral of rounded, tube-like ribs coils out from the middle, with a nest of quarter-circle arcs filling one corner and a pair of small arcs in each of the other three.
What size is each panel and how much wall does it cover?
Each panel is a 50 x 50cm square, so four of them together cover one square metre of wall.
How are the panels fixed to the wall?
Spread adhesive across the back of each panel and press it firmly onto the wall, then fill the joins with filler and wipe them clean. No special equipment is needed.
Do I need to buy anything else to fit them?
Yes, you will need adhesive to fix the panels and filler for the joins, as neither comes with the panels themselves.
Can the panels be cut to fit my wall?
Yes, they can be cut to fit, so you can trim the last panel in a row to meet a corner, the ceiling or the edge of the wall.
How do I clean the panels?
The PVC is waterproof, so a wipe with a damp cloth is all the panels need to keep them looking clean and white.