Sphere and Sweeping Arcs 3D PVC Wall Panels 50 x 50cm - White

Our Sphere and Sweeping Arcs 3D wall panels are white PVC, each carrying one bold, asymmetric motif. A raised sphere sits near the top left corner, a long arc sweeps from low on the left edge to the top right corner, and a larger semicircular arc rises to a crown near the centre. Their edges are crisp steps between smooth, gently curved surfaces, set in a relief 30mm deep. Each panel is a 50 x 50cm square, and because the motif appears once per panel rather than repeating within it, every square reads as a complete composition.

These panels suit interior walls in homes, offices, hotels and shops, and make a natural feature wall behind a sofa, a bed or a reception desk. White keeps the look calm while the relief does the work: as light falls across the wall, the sphere picks up a soft highlight and the stepped arcs draw fine lines of shade. The deep relief casts clear shadows in side light, so the design shifts gently through the day. Repeat the motif square after square for a steady rhythm, or keep it to one alcove for a quieter accent.

Each panel is formed from a 0.8mm PVC sheet, which is waterproof and low maintenance. Fitting needs no special equipment: spread adhesive on the back, press the panel onto the wall and cut to fit where needed. Fill the joins with filler and wipe them clean so the squares sit together neatly. Adhesive and filler are sold separately. Four panels cover one square metre, which makes it simple to work out how many your wall needs. A damp cloth keeps the surface fresh. Keep furniture low and the wall uncluttered so the sweeping arcs have room to breathe.

What does the Sphere and Sweeping Arcs pattern look like?

Each panel carries one asymmetric motif: a raised sphere near the top left corner, a long arc sweeping up to the top right corner and a larger semicircular arc rising to a crown near the centre.

How big is each panel and how many will I need?

Each panel is a 50 x 50cm square, and four of them cover one square metre, so measure your wall in square metres and allow four panels for each one.

How are the panels fixed to the wall?

You spread adhesive on the back of each panel and press it onto the wall, then fill the joins with filler and wipe them clean. No special equipment is needed.

Do I need to buy anything else to fit them?

Yes. You will need adhesive to fix the panels and filler for the joins, because neither one comes with the panels themselves.

Can the panels be cut to fit my wall?

Yes, the panels can be cut to fit, so you can trim them wherever your wall needs a narrower piece to finish a row.

How do I clean the panels?

The white PVC is low maintenance: simply wipe the surface with a damp cloth whenever it needs freshening up.