Free Delivery on all orders over £99*
Save 30%

Sparx 54W Constant Voltage Dimmable LED Driver - IP20

£21899
RRP £31200
The RRP is the manufacturer's recommended retail price of the item.
9 In Stock - Ready to Ship
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Sparx 54W is a constant voltage dimmable LED driver delivering stable 24V DC output to compatible LED strip lighting, tape and linear fittings. The driver converts 230V mains to regulated low-voltage DC while supporting dimming control via compatible wall dimmers or control systems, maintaining flicker-free performance across the dimming range.

Designed for installation in ceiling voids, wall cavities and behind joinery where space is limited, the driver measures 280mm long with a 21mm profile, allowing it to fit into standard stud wall depths and ceiling plenum spaces. The IP20 rating suits dry interior locations only. The driver pairs with LED installations requiring up to 54W total load, making it suitable for under-cabinet lighting runs of 4-6m, cove lighting in residential rooms, or accent lighting behind headboards and architectural features.

The metal housing dissipates heat passively without requiring active cooling, keeping operating temperatures within safe limits when installed with adequate ventilation clearance. Push-fit spring terminals accept cable entry from both ends of the driver, simplifying installation where cable routes are constrained. The driver includes short-circuit, overload and over-temperature protection, shutting down automatically if fault conditions are detected and resuming operation once the fault clears.

Specification
Length (mm) 280
Projection (mm) 21
Dimmable Yes
IP Rating IP20
Warranty 5 Years
Frequently Asked

What type of dimmer is needed?

The Sparx driver requires a trailing-edge (electronic) dimmer on the 230V mains input side. Not all dimmers are compatible with LED drivers — check dimmer specifications or contact us before pairing. The driver itself regulates the low-voltage output to the LED load during dimming.

Can it be used outdoors or in bathrooms?

No. The IP20 rating suits dry interior locations only. For bathrooms, outdoor installations or damp environments, an IP65 or IP67 rated driver is required.

What total LED load can it power?

The driver supports up to 54W total load at 24V DC. For example, if your LED strip draws 12W per metre, you can run approximately 4.5 metres of strip from one driver. Always check the wattage per metre rating of your LED product and calculate total run length accordingly.

Where should it be installed?

Install in a location with adequate ventilation clearance around the metal housing to allow passive heat dissipation. Ceiling voids, wall cavities behind switches, and joinery with ventilation slots are typical installation points. Do not bury the driver in insulation or seal it in an airtight enclosure.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Sparx 54W is a constant voltage dimmable LED driver delivering stable 24V DC output to compatible LED strip lighting, tape and linear fittings. The driver converts 230V mains to regulated low-voltage DC while supporting dimming control via compatible wall dimmers or control systems, maintaining flicker-free performance across the dimming range.

    Designed for installation in ceiling voids, wall cavities and behind joinery where space is limited, the driver measures 280mm long with a 21mm profile, allowing it to fit into standard stud wall depths and ceiling plenum spaces. The IP20 rating suits dry interior locations only. The driver pairs with LED installations requiring up to 54W total load, making it suitable for under-cabinet lighting runs of 4-6m, cove lighting in residential rooms, or accent lighting behind headboards and architectural features.

    The metal housing dissipates heat passively without requiring active cooling, keeping operating temperatures within safe limits when installed with adequate ventilation clearance. Push-fit spring terminals accept cable entry from both ends of the driver, simplifying installation where cable routes are constrained. The driver includes short-circuit, overload and over-temperature protection, shutting down automatically if fault conditions are detected and resuming operation once the fault clears.

    Specification
    Length (mm) 280
    Projection (mm) 21
    Dimmable Yes
    IP Rating IP20
    Warranty 5 Years
    Frequently Asked

    What type of dimmer is needed?

    The Sparx driver requires a trailing-edge (electronic) dimmer on the 230V mains input side. Not all dimmers are compatible with LED drivers — check dimmer specifications or contact us before pairing. The driver itself regulates the low-voltage output to the LED load during dimming.

    Can it be used outdoors or in bathrooms?

    No. The IP20 rating suits dry interior locations only. For bathrooms, outdoor installations or damp environments, an IP65 or IP67 rated driver is required.

    What total LED load can it power?

    The driver supports up to 54W total load at 24V DC. For example, if your LED strip draws 12W per metre, you can run approximately 4.5 metres of strip from one driver. Always check the wattage per metre rating of your LED product and calculate total run length accordingly.

    Where should it be installed?

    Install in a location with adequate ventilation clearance around the metal housing to allow passive heat dissipation. Ceiling voids, wall cavities behind switches, and joinery with ventilation slots are typical installation points. Do not bury the driver in insulation or seal it in an airtight enclosure.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.