Description
The Spark is a 35cm diameter LED flush ceiling light with an integrated 18W 3000K LED housed behind a textured polycarbonate diffuser, set in a white powder-coated aluminium frame. The fitting sits just 45mm below the ceiling surface, making it one of the lowest-profile options for rooms with ceiling heights below 2.4m where a pendant would hang too low.
Designed for hallways, bathrooms, utility rooms, stairwells and entrance porches where both low clearance and even light distribution matter, the Spark provides functional ambient lighting without visual clutter. The IP40 rating offers basic protection against solid objects over 1mm but is not waterproof, so this fitting is suitable for indoor use and covered outdoor areas (under a porch canopy, for example) but not exposed to direct rain.
The circular diffuser panel hides the LED array behind a fine prismatic texture that breaks up glare and spreads light evenly across the ceiling and down into the room. At 3000K the colour temperature sits in the warm white range, closer to traditional halogen than the cooler tones of office lighting. The white powder-coated aluminium frame resists corrosion and pairs cleanly with white or light-coloured ceilings, minimising the visual footprint of the fitting itself.
The integrated LED is non-dimmable and rated at 18W, which typically delivers around 1,400-1,600 lumens depending on the LED batch. This output suits rooms up to approximately 10-12m² where the Spark acts as primary lighting, or larger spaces where it supplements other fittings. Ideal Lux back this fitting with a 5-year warranty covering the LED driver and housing.
Specification
| Diameter (mm) |
350 |
| Height (mm) |
45 |
| Dimmable |
No |
| Number Of Bulbs |
1 |
| Bulb Type |
LED |
| Colour Temperature |
3000K |
| IP Rating |
IP40 |
| Warranty |
5 Years |
Frequently Asked
Is this suitable for bathrooms?
The IP40 rating means the Spark is protected against solid objects over 1mm but is not waterproof. It can be used in bathrooms away from direct water exposure (not above a shower or bath), or in utility rooms and covered outdoor porches where moisture is present but the fitting is not directly splashed.
Can it be dimmed?
No. The integrated LED driver is not compatible with dimmer switches. Connecting the Spark to a dimmed circuit will cause flickering or failure to light.
What ceiling height does it suit?
At just 45mm projection from the ceiling, the Spark is ideal for rooms with ceiling heights below 2.4m where a pendant would hang too low or feel visually heavy. It works in standard 2.4m-height rooms and lower-ceiling conversions, loft rooms and basement spaces.
What size room does the 18W output cover?
The 18W LED typically delivers around 1,400-1,600 lumens, which suits rooms up to approximately 10-12m² as primary lighting. For larger rooms the Spark can act as supplementary or zone lighting, or multiple fittings can be installed.