Free Delivery on all orders over £99*
Save 29%

Spark 60W Constant Current LED Driver 1400mA 1-10V Dimmable

£9499
RRP £13440
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Spark is a 60W constant current LED driver from Ideal Lux, delivering 1400mA output with 1-10V analogue dimming control. The driver regulates current rather than voltage, maintaining stable light output across LED loads without flicker or colour shift as the dimmer level changes. The plastic housing measures 124mm x 82mm x 41mm and fits into ceiling voids, behind panels, or inside lighting enclosures where space is limited.

Designed for commercial installations, retail lighting, hospitality projects and residential downlight arrays where multiple LED fittings share a single driver, the Spark pairs with LED fixtures rated for 1400mA constant current operation. The 1-10V dimming interface connects to a separate wall-mounted dimmer or building management system, allowing brightness to be controlled from 10-100% without cutting power to the driver. The IP20 rating restricts use to dry indoor locations.

The constant current output means the driver automatically adjusts voltage to maintain 1400mA regardless of the number of LEDs wired in series, within the 60W power budget. This prevents overcurrent damage to the LEDs and delivers consistent brightness across all fittings in a circuit. The plastic enclosure includes knockout entry points for cable routing and metal mounting clips that secure the driver to a ceiling joist or panel frame. Ideal Lux backs the Spark with a 5-year warranty covering component failure and thermal performance degradation.

Specification
Length (mm) 124
Projection (mm) 82
Dimmable Yes
IP Rating IP20
Warranty 5 Years
Frequently Asked

What LEDs is this driver compatible with?

The Spark is compatible with LED fixtures rated for 1400mA constant current operation. Check the LED fixture datasheet to confirm it specifies 1400mA drive current. The total wattage of all connected LEDs must not exceed 60W.

How does 1-10V dimming work?

1-10V is an analogue dimming protocol requiring a separate low-voltage control wire run from a compatible wall dimmer or control system to the driver. The control voltage varies between 1V (minimum brightness, typically 10%) and 10V (full brightness). The driver interprets this signal and adjusts LED output accordingly.

Can this be used outdoors or in bathrooms?

No. The IP20 rating means the driver is not protected against moisture ingress and must be installed in dry indoor locations only. For outdoor or bathroom installations, specify a driver with IP65 or IP67 rating.

What are the input voltage requirements?

The label visible in the image indicates the driver accepts 220-240V AC mains input at 50/60Hz. Always verify input voltage compatibility with your mains supply before installation.

Shipping & Returns

Free worldwide delivery

Free worldwide delivery on all orders over £99. International orders for third-party brand products may be subject to an additional courier surcharge based on volumetric weight, particularly on larger lighting fixtures — if a surcharge applies, our team will email you with the amount before dispatch and you can proceed or cancel for a full refund. See full delivery terms.

Returns

30-day returns window from delivery. As all our products are electrical or lighting goods, returned items must be inspected and recertified by a qualified electrician before resale — the cost of this inspection (25–40% of the item value) is deducted from your refund. Customers pay return shipping. Made-to-order, special-order and clearance items cannot be returned. See full returns policy.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Spark is a 60W constant current LED driver from Ideal Lux, delivering 1400mA output with 1-10V analogue dimming control. The driver regulates current rather than voltage, maintaining stable light output across LED loads without flicker or colour shift as the dimmer level changes. The plastic housing measures 124mm x 82mm x 41mm and fits into ceiling voids, behind panels, or inside lighting enclosures where space is limited.

    Designed for commercial installations, retail lighting, hospitality projects and residential downlight arrays where multiple LED fittings share a single driver, the Spark pairs with LED fixtures rated for 1400mA constant current operation. The 1-10V dimming interface connects to a separate wall-mounted dimmer or building management system, allowing brightness to be controlled from 10-100% without cutting power to the driver. The IP20 rating restricts use to dry indoor locations.

    The constant current output means the driver automatically adjusts voltage to maintain 1400mA regardless of the number of LEDs wired in series, within the 60W power budget. This prevents overcurrent damage to the LEDs and delivers consistent brightness across all fittings in a circuit. The plastic enclosure includes knockout entry points for cable routing and metal mounting clips that secure the driver to a ceiling joist or panel frame. Ideal Lux backs the Spark with a 5-year warranty covering component failure and thermal performance degradation.

    Specification
    Length (mm) 124
    Projection (mm) 82
    Dimmable Yes
    IP Rating IP20
    Warranty 5 Years
    Frequently Asked

    What LEDs is this driver compatible with?

    The Spark is compatible with LED fixtures rated for 1400mA constant current operation. Check the LED fixture datasheet to confirm it specifies 1400mA drive current. The total wattage of all connected LEDs must not exceed 60W.

    How does 1-10V dimming work?

    1-10V is an analogue dimming protocol requiring a separate low-voltage control wire run from a compatible wall dimmer or control system to the driver. The control voltage varies between 1V (minimum brightness, typically 10%) and 10V (full brightness). The driver interprets this signal and adjusts LED output accordingly.

    Can this be used outdoors or in bathrooms?

    No. The IP20 rating means the driver is not protected against moisture ingress and must be installed in dry indoor locations only. For outdoor or bathroom installations, specify a driver with IP65 or IP67 rating.

    What are the input voltage requirements?

    The label visible in the image indicates the driver accepts 220-240V AC mains input at 50/60Hz. Always verify input voltage compatibility with your mains supply before installation.

    Shipping & Returns

    Free worldwide delivery

    Free worldwide delivery on all orders over £99. International orders for third-party brand products may be subject to an additional courier surcharge based on volumetric weight, particularly on larger lighting fixtures — if a surcharge applies, our team will email you with the amount before dispatch and you can proceed or cancel for a full refund. See full delivery terms.

    Returns

    30-day returns window from delivery. As all our products are electrical or lighting goods, returned items must be inspected and recertified by a qualified electrician before resale — the cost of this inspection (25–40% of the item value) is deducted from your refund. Customers pay return shipping. Made-to-order, special-order and clearance items cannot be returned. See full returns policy.