Small Irregular Pyramids 3D PVC Wall Panels 50 x 50cm - White

Our Small Irregular Pyramids 3D wall panels are white PVC, covered edge to edge with faceted pyramids of irregular kite and triangle outline, set at varied sizes and angles with no regular grid. Each pyramid is made of flat triangular facets meeting at an off-centre peak, and narrow flat grooves separate it from its neighbours, so the eye never settles on a simple repeat. The relief is 60mm deep, bold and sharp-edged, and each panel is a 50 x 50cm square.

These panels are made for interior walls in homes, offices, hotels and shops. They suit a feature wall behind a bed, a sofa or a reception desk, or a shop wall that needs a backdrop with real depth. The pattern changes as the light does: when it falls across the wall from one side, the pyramids cast strong shadows and each facet takes its own shade of white, while soft, even light turns it into a quieter texture. Four panels cover one square metre, which makes it simple to work out how many a wall needs.

Each panel is formed from a 0.8mm sheet, and because PVC is waterproof, a damp cloth is all it takes to wipe the surface clean, so care stays low maintenance. Fitting needs no special equipment. Spread adhesive on the back of the panel and press it onto the wall, cut panels to fit where the wall ends, then fill the joins with filler and wipe them clean. Adhesive and filler are sold separately. For styling, keep the furniture in front simple and let a lamp or window light the wall from the side, where the facets look their sharpest.

What does the pattern on these panels look like?

Faceted pyramids of irregular kite and triangle outline cover the whole panel at varied sizes and angles. Each one rises to an off-centre peak, with narrow flat grooves between them and no regular grid.

How big is each panel and how much wall does it cover?

Each panel is a 50 x 50cm square, and four panels cover one square metre, which is the figure to work from when you measure your wall.

How are the panels fitted, and can they be cut?

Spread adhesive on the back of each panel and press it onto the wall, cutting panels to fit at the edges. Then fill the joins with filler and wipe them clean. No special equipment is needed.

Do the panels come with adhesive?

They do not. You will need to buy the adhesive for fixing and the filler for the joins on their own, so have both ready before you start.

Where can these 3D wall panels go?

They are for interior walls in homes, offices, hotels and shops, and they work well as a feature wall where light falls across the pyramids from one side.

How do I clean the panels?

Wipe them with a damp cloth whenever they need it. The PVC is waterproof and the panels are low maintenance, so looking after them takes very little effort.