Description
Our Sloping Squares and Bars 3D wall panels bring a calm, architectural pattern to a plain wall. Each white panel is a 50cm square divided into quarters by a narrow cross of flat channels. Two large raised squares sit in opposite corners, top left and bottom right, while each of the other two quarters holds a single horizontal bar lying beside the centre line, with flat background beyond it. Every block is a sloping slab that stands highest near the middle of the panel and falls away towards its outer edge, and with a relief 20mm deep the geometric design has a quiet sense of movement.
These panels are made for interior walls in homes, offices, hotels and shops. Use them across a feature wall behind a bed or sofa, in a reception area, or as a backdrop in a shop or hotel lobby. Laid edge to edge, the squares and bars repeat in a steady rhythm. Because each slab slopes, the pattern shifts with the light: side light from a window or wall light catches the high edges near the centre and throws shadows into the channels, while soft overhead light keeps the look gentle and even. Four panels cover one square metre, which makes it simple to work out how many a wall needs.
Each panel is formed from a 0.8mm PVC sheet, and fitting needs no special equipment: spread adhesive on the back of the panel, press it onto the wall and cut panels to fit where the wall ends. Fill the joins with filler and wipe them clean for a tidy, continuous surface. Adhesive and filler are sold separately. Once up, the panels are low maintenance and wipe clean with a damp cloth. For a crisp, gallery-like look, keep the surrounding walls and trim plain and let a single lamp pick out the slopes in the evening.
Specification
| Pattern |
Sloping Squares and Bars |
| Colour |
White |
| Material |
PVC |
| Panel Size |
50 x 50cm |
| Relief Depth |
20mm |
| Sheet Thickness |
0.8mm |
| Coverage Per Panel |
0.25m² |
| Fixing |
Adhesive (Sold Separately) |
| Joins |
Filler (Sold Separately) |
| Suitable For |
Interior Walls |
Frequently Asked
What does the Sloping Squares and Bars pattern look like?
Two large raised squares fill opposite corners and two horizontal bars sit beside the centre line, each a sloping slab separated by a narrow cross of flat channels.
How big is each panel and how many do I need?
Each panel is a 50 x 50cm square, so four panels cover one square metre of wall when you are planning how many to order.
How are these 3D wall panels fixed to the wall?
Spread adhesive across the back of the panel and press it firmly onto the wall; no special equipment is needed for fitting.
Is anything else needed to fit them?
Yes, you will need to buy adhesive for fixing and filler for the joins, as neither comes with the panels.
Can I cut the panels to fit my wall?
Yes, the PVC panels can be cut to fit at the edges of the wall, and the joins are then filled with filler and wiped clean.
How do I clean the panels?
They are low maintenance; simply wipe the white PVC surface with a damp cloth whenever it needs freshening up.