Description
The Selvara is a 380mm wall light built from two parallel columns of natural Spanish alabaster, each held top and bottom by small matt black brackets and mounted on a single matt black rectangular backplate. An integrated 10W LED runs through the fitting, casting warm 3000K light through both stone columns and washing the wall above and below the bracket.
At 150mm wide and 100mm deep, the Selvara suits hallways, stairwells, bedside positions and bathroom-adjacent dressing areas where a slim profile matters. The dual-column layout pushes light forward through the alabaster faces and downward across the wall, giving a gentle vertical glow rather than a harsh point source. The compact backplate sits flush to the wall and conceals the driver and wiring behind it.
Each alabaster column is cut from natural Spanish stone, so the veining, cloudy patches and faint tonal shifts vary between pieces. When unlit the columns read as pale, near-white stone against the matt black hardware; when lit, the internal LED brings out warmer cream tones and reveals the natural mineral patterns within the alabaster. The stainless steel frame and matt black powder finish give the fitting a clean architectural edge that pairs with monochrome, minimalist and contemporary interiors.
Specification
| Material |
Stainless Steel & Natural Spanish Alabaster |
| Finish |
Matte Black & Soft White |
| Width |
150mm |
| Height |
380mm |
| Depth |
100mm |
| Lamp Socket |
Integrated LED |
| Colour Temperature |
3000K |
| Wattage |
10W |
| Voltage |
230V |
| Weight |
- |
| Warranty |
2 Year |
Frequently Asked
Does the Selvara come with a bulb?
Yes. The light source is an integrated 10W LED running at 3000K (warm white) on 230V mains, so no separate bulb is needed. The LED is built into the fitting and is not user-replaceable.
Is it suitable for bathrooms?
The Selvara does not carry a published IP rating in the supplied specification, so it should be treated as an indoor fitting for dry locations. It can be used in dressing areas adjacent to bathrooms, but not within bathroom zones where an IP44 or higher rating is required.
Does each alabaster column look the same?
No. Each column is cut from natural Spanish alabaster, so veining, cloudy patches and tonal variation differ between pieces and even between the two columns on the same fitting. This is a feature of the stone, not a defect.
How is it mounted?
The Selvara mounts to a wall via the rectangular matt black backplate, which conceals the driver and wiring. Installation should be carried out by a qualified electrician on a standard 230V supply.