Description
Scattered Oval Rings is a white 3D wall panel in PVC, a 50cm square with a relief 10mm deep. Raised, rounded tubes form rings, ovals and open arcs of mixed sizes, from small loops to sweeping curves, set at varied angles across a flat background with no regular grid. Several arcs run off the edges, so the pattern carries on from one panel to the next, and a wall of them reads as one loose, flowing design rather than a row of tiles.
Our 3D wall panels are made for interior walls in homes, offices, hotels and shops, and this pattern suits a feature wall behind a sofa, a headboard or a reception desk. Because the tubes are rounded, the shadows they cast are soft rather than sharp: in daylight from a window the rings stand gently forward, and a lamp or wall light set to one side picks out every curve more strongly. The relaxed, irregular layout brings movement and interest without the formality of a grid, in a living room, a hallway or a bedroom.
Each panel is formed from a 0.8mm PVC sheet, and fitting needs no special equipment. Spread adhesive on the back, press the panel onto the wall and cut panels to fit at edges and corners, then fill the joins with filler and wipe them clean so the rings run on unbroken. Adhesive and filler are sold separately. Four panels cover one square metre, which makes it simple to work out how many your wall needs. PVC is waterproof and low maintenance, so a wipe with a damp cloth keeps the surface fresh. For styling, keep the furniture in front simple and let the white rings do the work.
Specification
| Pattern |
Scattered Oval Rings |
| Colour |
White |
| Material |
PVC |
| Panel Size |
50 x 50cm |
| Relief Depth |
10mm |
| Sheet Thickness |
0.8mm |
| Coverage Per Panel |
0.25m² |
| Fixing |
Adhesive (Sold Separately) |
| Joins |
Filler (Sold Separately) |
| Suitable For |
Interior Walls |
Frequently Asked
What does the Scattered Oval Rings pattern look like?
Raised, rounded tubes make rings, ovals and open arcs of different sizes, scattered at varied angles on a flat white background, with some arcs running off the edges so the design flows across neighbouring panels.
How big is each panel and how much wall does it cover?
Each panel is 50 x 50cm, and four of them together cover one square metre of wall, which makes planning your order straightforward.
How do I fit the panels?
Spread adhesive on the back of each panel and press it onto the wall, cutting panels to fit where needed, then fill the joins with filler and wipe them clean. No special equipment is needed.
Do I need to buy anything else to put them up?
Yes. You will need to buy a suitable adhesive and filler on their own before you start fitting your panels.
Where can I use these panels?
They are made for interior walls in homes, offices, hotels and shops, and work especially well as a feature wall in a living room, hallway or reception area.
How do I keep the panels clean?
The PVC is waterproof and low maintenance, so an occasional wipe with a damp cloth is all the panels need to stay fresh.