Description
Our Scattered Maple Leaves 3D wall panels bring a quiet touch of autumn indoors. Each white PVC panel is a 50 x 50cm square, with six raised maple leaves scattered loosely across a flat, plain ground: two near the top, one in the centre and three along the bottom, each turned a different way. Every leaf has crisp edges, incised veins and a long curved stem, and the wide plain gaps between them give the design room to breathe. The relief is 8mm deep, enough to lift the leaves clearly from the ground and cast soft, moderate shadows.
These panels are made for interior walls, in homes, offices, hotels and shops. They suit a feature wall behind a bed or sofa, a reception area or a shop wall behind a counter. Because the leaves sit apart rather than in a tight grid, the wall reads as a loose drift of foliage, calm from across the room and more detailed up close. As light falls across it from a window or a wall lamp, the veins and edges pick up fine lines of shadow, so the pattern shifts gently through the day. Side light brings out the most depth; flatter, even light keeps the look soft and pale.
Each panel is formed from a 0.8mm PVC sheet. Fitting needs no special equipment: spread adhesive on the back of the panel, press it onto the wall, and cut panels to fit at edges and corners. Fill the joins with filler and wipe them clean. Adhesive and filler are sold separately. Four panels cover one square metre, which makes it simple to work out how many your wall needs. The PVC is waterproof and low maintenance, and a damp cloth is all it takes to keep it clean. Pair the wall with natural wood, linen and plenty of greenery, and let the leaves do the rest.
Specification
| Pattern |
Scattered Maple Leaves |
| Colour |
White |
| Material |
PVC |
| Panel Size |
50 x 50cm |
| Relief Depth |
8mm |
| Sheet Thickness |
0.8mm |
| Coverage Per Panel |
0.25m² |
| Fixing |
Adhesive (Sold Separately) |
| Joins |
Filler (Sold Separately) |
| Suitable For |
Interior Walls |
Frequently Asked
What does the Scattered Maple Leaves pattern look like?
Six raised maple leaves with incised veins and long curved stems sit loosely across a flat, plain ground, each turned a different way, with wide gaps between them.
How big is each panel and how many do I need?
Each panel is a 50 x 50cm square, and four panels cover one square metre, so measure your wall in square metres to work out your total.
How are the panels fixed to the wall?
Spread adhesive on the back of each panel and press it onto the wall, then fill the joins with filler and wipe them clean. No special equipment is needed.
Is anything else needed to fit them?
Yes, you will need to buy adhesive and filler as well, since neither of them comes with the panels.
Can I cut the panels to fit?
Yes, the panels can be cut to fit around edges, corners and awkward spaces, so the pattern runs right up to the end of the wall.
How do I clean the panels?
Wipe the panels with a damp cloth whenever they need freshening up; the waterproof PVC is low maintenance, so that is all the care they ask for.