Scattered Faceted Triangles 3D PVC Wall Panels 50 x 50cm - White

Our Scattered Faceted Triangles 3D wall panels bring an angular, irregular geometric pattern to a plain wall. Each white PVC panel is a 50cm square laid out as a three-by-three grid, with faceted triangular pyramids set across most of the squares. Their peaks sit off centre, most fill half a square, and they turn in different directions. Three smaller triangles join them, one long shard runs diagonally from the top-left corner across two squares, and one square is left flat. The arrangement looks scattered within a panel and repeats from panel to panel. The pyramids rise in a relief 20mm deep.

They are made for interior walls in homes, offices, hotels and shops. A feature wall behind a bed, a sofa or a reception desk suits them well. The depth of the relief is what makes the pattern work. When light falls across the wall from a window or a lamp to one side, each sloping face catches it differently and the triangles cast sharp shadows; under even light from the front the pattern softens into a quieter texture of white facets. They suit anyone who wants pattern on a wall without adding colour, and the clean geometry sits comfortably with modern furniture and plain fabrics.

Each panel is formed from a 0.8mm PVC sheet. To fit them, spread adhesive on the back of a panel and press it onto the wall; no special equipment is needed. The panels cut to fit at corners and edges, and the joins are filled with filler and wiped clean. Adhesive and filler are sold separately. When working out how many 3D wall panels you need, four panels cover one square metre. PVC is waterproof, so care is a wipe with a damp cloth and the panels need little maintenance. Keep the walls and woodwork around them plain, so the triangles carry the pattern on their own.

What does the Scattered Faceted Triangles pattern look like?

It is a three-by-three grid of faceted triangular pyramids with off-centre peaks, turned in different directions, with three smaller triangles, a long diagonal shard and one flat square. It looks irregular within each panel and repeats from one panel to the next.

How big is each panel and how many do I need?

Each panel is 50 x 50cm. Four of them cover one square metre, so measure your wall in square metres and allow four panels for each one.

How are the panels fixed to the wall?

You spread adhesive across the back of each panel and press it firmly onto the wall. No special equipment is needed for the job.

Is anything else needed to put them up?

Yes. You will need to buy adhesive to fix the panels and filler for the joins between them, as neither comes with the panels.

Can the panels be cut to fit?

Yes, they cut to fit. You can trim the last panel in a row to meet a corner or the edge of the wall, then fill the join and wipe it clean.

How do I clean them?

Wipe them over with a damp cloth. The PVC is waterproof and the panels need little maintenance, so an occasional wipe keeps the white relief looking fresh.