Description
Scattered Domes and Rings is a white 3D wall panel with five round forms of mixed size placed unevenly across a flat background. Two are smooth solid domes and three are raised rings around dished, recessed centres, with the largest ring sitting in the lower left. There is no grid and no regular spacing, so the design feels loose and relaxed, a geometric pattern that never looks rigid. Each panel is a 50cm square moulded in PVC, with a relief 12mm deep: enough for every dome and rim to cast a clear shadow, while the panel still sits close to the wall.
Our 3D wall panels are made for interior walls in homes, offices, hotels and shops. Laid edge to edge behind a bed, a sofa or a reception desk, they build a feature wall of scattered circles that draws the eye without crowding the room. The pattern changes with the light. In soft, even daylight the domes and rings read as gentle curves on the flat ground; when a window or lamp throws light from the side, each rim picks up a bright edge and the recessed centres fall into shade, so the wall shifts through the day. It suits a quiet bedroom as well as a busy shop or hotel lobby.
Each panel is formed from a 0.8mm sheet, and fitting needs no special equipment. Spread adhesive on the back, press the panel onto the wall, and cut panels to fit where the wall ends. Fill the joins with filler and wipe them clean. Adhesive and filler are sold separately. Four panels cover one square metre, which makes it simple to measure a wall and work out how many you need. The panels are waterproof, low maintenance and wipe clean with a damp cloth. For styling, keep the furniture in front low and simple so the full spread of circles stays in view.
Specification
| Pattern |
Scattered Domes and Rings |
| Colour |
White |
| Material |
PVC |
| Panel Size |
50 x 50cm |
| Relief Depth |
12mm |
| Sheet Thickness |
0.8mm |
| Coverage Per Panel |
0.25m² |
| Fixing |
Adhesive (Sold Separately) |
| Joins |
Filler (Sold Separately) |
| Suitable For |
Interior Walls |
Frequently Asked
What does the Scattered Domes and Rings pattern look like?
Five round forms of mixed size sit unevenly on a flat background: two smooth domes and three raised rings with recessed, dished centres, with no grid or regular spacing.
How big is each panel and how many will I need?
Each panel is 50 x 50cm, so four of them cover one square metre. Measure your wall in square metres to work out how many panels to order.
How deep is the relief on these panels?
The domes and rings stand out in a relief 12mm deep, which gives them clear shadows when light falls across the wall from the side.
How are the panels fitted to the wall?
Spread adhesive on the back of each panel, press it onto the wall and cut panels to fit at the edges. Fill the joins with filler and wipe them clean; no special equipment is needed.
Do the panels come with adhesive and filler?
No. The adhesive and the filler are bought separately from the panels, so have both ready before you start fitting.
How do I clean the panels?
Wipe them over with a damp cloth. The PVC is waterproof and low maintenance, so a quick wipe keeps the white surface looking fresh.