Description
Our Scattered Cushion Squares 3D wall panels set eight rounded squares and short rectangles across a flat background, with no regular grid to the layout. Four of the shapes are raised, domed cushions and four are flat, marked out only by a thin moulded edge, and two of the cushions sit over the lower left corners of outlined shapes, as if they had been dropped there. The cushions stand in a relief 13mm deep, while the outlines stay very shallow and quiet. Each panel is a 50cm square in white PVC.
These panels are for interior walls in homes, offices, hotels and shops. They suit a feature wall behind a bed or sofa, behind a reception desk or in a shop where you want texture rather than colour. Because the shapes are scattered, a wall of them has a relaxed, playful rhythm. The domed cushions catch light on their upper curves and drop a soft shadow beneath, so the pattern is gentlest under flat overhead light and most pronounced when a window or wall light rakes across from the side. Four panels cover one square metre, which makes working out how many a wall needs a simple sum.
Each panel is formed from a 0.8mm sheet, and as PVC is waterproof it wipes clean with a damp cloth and stays low maintenance. To fit one, spread adhesive across its back and press it onto the wall; no special equipment is needed. Panels cut to fit at the edges of a wall and around sockets, and the joins are filled with filler and wiped clean. Adhesive and filler are sold separately. For the best effect, run them floor to ceiling on a single wall and keep the furniture in front low, so the scattered cushions are seen as a whole.
Specification
| Pattern |
Scattered Cushion Squares |
| Colour |
White |
| Material |
PVC |
| Panel Size |
50 x 50cm |
| Relief Depth |
13mm |
| Sheet Thickness |
0.8mm |
| Coverage Per Panel |
0.25m² |
| Fixing |
Adhesive (Sold Separately) |
| Joins |
Filler (Sold Separately) |
| Suitable For |
Interior Walls |
Frequently Asked
What does the Scattered Cushion Squares pattern look like?
Eight rounded squares and short rectangles are scattered over a flat background, four raised as domed cushions and four marked out by a thin moulded edge, with no regular grid.
How big is each panel and how much wall does it cover?
Each panel is 50 x 50cm, so four of them cover one square metre, which helps when you are measuring up a wall.
How are the panels fixed to the wall?
You spread adhesive across the back of each panel and press it onto the wall, then fill the joins with filler and wipe them clean. No special equipment is needed.
Do I need to buy anything else to fit them?
Yes, you will need adhesive for fixing and filler for the joins, as neither comes with the panels and both are bought separately.
Can I cut the panels to fit my wall?
Yes, the panels cut to fit, so you can trim them at the edges of a wall or around sockets and switches before fixing them.
How do I clean the panels?
PVC is waterproof, so a wipe with a damp cloth is all the panels need to keep the white relief looking fresh.