Description
Our Scattered Concentric Rings 3D wall panels bring a playful geometric pattern to a plain wall. Five groups of raised concentric rings in different sizes are scattered across a flat background. Each group is built from several rounded rings around a small central ring. The largest group sits in the upper left and spans just over half the panel's width, while the smallest, near the bottom edge, is about a fifth of it. The groups stand apart from one another and from the edges, so the flat ground between them gives the rings room to breathe. The rounded rings rise in a relief 16mm deep, and each white PVC panel is a 50cm square.
These panels are made for interior walls in homes, offices, hotels and shops. They suit a feature wall behind a sofa or bed, along a hallway, or behind a reception desk or shop counter. Because the ring groups are scattered rather than set in rows, the pattern feels relaxed. It also changes through the day. In side light from a window or a wall washer, each raised ring throws a crescent of shadow, while softer front light lets the surface settle into gentle contours. Four panels cover one square metre, which makes working out how many a wall needs straightforward.
Each panel is formed from a 0.8mm PVC sheet, which is waterproof. Fitting needs no special equipment: spread adhesive on the back of the panel, press it onto the wall, and cut panels to fit around edges and corners. Fill the joins with filler and wipe them clean for a neat finish. Adhesive and filler are sold separately. Once up, the panels are low maintenance and wipe clean with a damp cloth. For a balanced look, centre the panels on a bed or sofa and leave the neighbouring walls plain so the rings hold the eye.
Specification
| Pattern |
Scattered Concentric Rings |
| Colour |
White |
| Material |
PVC |
| Panel Size |
50 x 50cm |
| Relief Depth |
16mm |
| Sheet Thickness |
0.8mm |
| Coverage Per Panel |
0.25m² |
| Fixing |
Adhesive (Sold Separately) |
| Joins |
Filler (Sold Separately) |
| Suitable For |
Interior Walls |
Frequently Asked
What does the Scattered Concentric Rings pattern look like?
Five groups of raised, rounded concentric rings in different sizes sit apart from one another on a flat background, with the largest group in the upper left.
How big is each panel and how many will I need?
Each panel is a 50 x 50cm square, and four panels cover one square metre, so measuring your wall in square metres tells you how many to order.
How are these 3D wall panels fixed and cut to fit?
Spread adhesive on the back of each panel and press it onto the wall, cutting panels to fit where needed, then fill the joins and wipe them clean. No special equipment is required.
Do I need to buy anything else to fit them?
Yes, you will need to buy both the adhesive for fixing and the filler for the joins on their own before you start fitting.
Where can I use these panels?
They are made for interior walls in homes, offices, hotels and shops, and work well as a feature wall behind a bed, sofa or reception desk.
How do I clean the panels?
The PVC is waterproof and low maintenance, so a wipe with a damp cloth is all the panels need to stay fresh and bright.