Description
Our Rings and Petals 3D wall panels bring a crisp geometric pattern to a plain wall. Raised, flat-topped rings, each with a sunken round centre, sit in a straight square grid, and the rings along the edges are cut in half by the border of the panel. Between every four neighbouring rings is a small four-petal motif of almond-shaped bosses pointing up, down, left and right. Each panel is a white PVC square, 50 x 50cm, with a relief 10mm deep: enough to give the rings clean, definite edges and the petals a softly rounded shape.
These panels are made for interior walls in homes, offices, hotels and shops, and they work best as a feature wall: behind a bed or a sofa, along a reception desk or as the backdrop to a shop display. Because the pattern is a regular grid, it reads calmly from across a room and grows more detailed as you come closer. Light falling from one side, from a window or a wall light, casts gentle shadows that pick out the rim of every ring and the curve of every petal, while light from the front keeps the wall softer and more even.
Each panel is formed from a 0.8mm PVC sheet. Fitting needs no special equipment: spread adhesive on the back of the panel and press it onto the wall, cut panels to fit at the edges and corners, then fill the joins with filler and wipe them clean. Adhesive and filler are sold separately. Four panels cover one square metre, which makes it straightforward to measure a wall and work out how many you need. PVC is waterproof, and the panels are low maintenance: a damp cloth is all they need. For a balanced wall, start from the centre so the cut panels at each end match.
Specification
| Pattern |
Rings and Petals |
| Colour |
White |
| Material |
PVC |
| Panel Size |
50 x 50cm |
| Relief Depth |
10mm |
| Sheet Thickness |
0.8mm |
| Coverage Per Panel |
0.25m² |
| Fixing |
Adhesive (Sold Separately) |
| Joins |
Filler (Sold Separately) |
| Suitable For |
Interior Walls |
Frequently Asked
What does the Rings and Petals pattern look like?
Raised, flat-topped rings with sunken round centres sit in a straight square grid, and a small four-petal motif of almond-shaped bosses fills each gap between four rings.
How big is each panel and how much wall does it cover?
Each panel is a 50cm square, and four panels cover one square metre, which helps when you measure up your wall.
How are the panels fixed to the wall?
Spread adhesive on the back of the panel, press it firmly onto the wall, then fill the joins with filler and wipe them clean. No special equipment is needed.
Do I need to buy adhesive and filler as well?
Yes, you will need both, as neither comes with the panels: the adhesive holds each panel to the wall and the filler finishes the joins between them.
Can I cut the panels to fit my wall?
Yes, each panel can be cut to fit, so you can finish neatly where the wall meets a corner, the ceiling or a skirting board.
Where can I use these panels and how do I clean them?
They are made for interior walls in homes, offices, hotels and shops. PVC is waterproof and the panels are low maintenance, so wiping them with a damp cloth keeps them clean.