Free Delivery on all orders over £99*

Radity Magnetic Track 2 Pack End Cap - White

£299
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Radity end cap is a white plastic closure piece for Maytoni's magnetic surface-mounted track lighting system, supplied as a pair. Each cap measures 25mm long by 6mm wide by 8mm high and clips onto the open end of a track section to seal it from dust and provide a finished edge. The cap fits flush with the track profile, continuing the clean line of the installation without visible fixings or protrusion.

Designed for residential and commercial magnetic track installations where track runs terminate at walls, corners or mid-ceiling positions rather than forming a continuous loop. The cap prevents dust entering the track channel and stops light from leaking out of the open end when track-mounted spotlights are positioned near the terminus. The white finish matches Maytoni's white track sections and allows the end cap to disappear into white or light-coloured ceilings.

Each cap is injection-moulded plastic with a push-fit attachment mechanism that requires no tools to install. The pack of two covers both ends of a single track run or one end each of two separate runs. The caps do not carry electrical current and can be fitted or removed at any time without isolating the track power supply, though Maytoni recommends fitting them before energising a newly installed track to prevent accidental contact with live terminals.

Specification
Height 0.8cm
Length 2.5cm
Width 0.6cm
Finish White
Construction Plastic
Warranty 2 Year Guarantee
Downloads

Product Manual

Frequently Asked

Are these compatible with recessed magnetic track?

No. These end caps are designed specifically for Maytoni's surface-mounted magnetic track profile. Recessed track systems use a different profile and require separate end cap components.

Can the end caps be fitted after the track is powered?

Yes, the caps clip onto the track end and do not carry electrical current, so they can be added or removed at any time. However, Maytoni recommends fitting them before energising a newly installed track to avoid accidental contact with exposed terminals.

Do I need one pack per track run?

Each pack contains two end caps. A single straight track run terminating at both ends requires one pack. If you are installing multiple track sections that each need closing at one or both ends, calculate the total number of open ends and divide by two to determine how many packs are needed.

Shipping & Returns

Free worldwide delivery

Free worldwide delivery on all orders over £99. International orders for third-party brand products may be subject to an additional courier surcharge based on volumetric weight, particularly on larger lighting fixtures — if a surcharge applies, our team will email you with the amount before dispatch and you can proceed or cancel for a full refund. See full delivery terms.

Returns

30-day returns window from delivery. As all our products are electrical or lighting goods, returned items must be inspected and recertified by a qualified electrician before resale — the cost of this inspection (25–40% of the item value) is deducted from your refund. Customers pay return shipping. Made-to-order, special-order and clearance items cannot be returned. See full returns policy.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Radity end cap is a white plastic closure piece for Maytoni's magnetic surface-mounted track lighting system, supplied as a pair. Each cap measures 25mm long by 6mm wide by 8mm high and clips onto the open end of a track section to seal it from dust and provide a finished edge. The cap fits flush with the track profile, continuing the clean line of the installation without visible fixings or protrusion.

    Designed for residential and commercial magnetic track installations where track runs terminate at walls, corners or mid-ceiling positions rather than forming a continuous loop. The cap prevents dust entering the track channel and stops light from leaking out of the open end when track-mounted spotlights are positioned near the terminus. The white finish matches Maytoni's white track sections and allows the end cap to disappear into white or light-coloured ceilings.

    Each cap is injection-moulded plastic with a push-fit attachment mechanism that requires no tools to install. The pack of two covers both ends of a single track run or one end each of two separate runs. The caps do not carry electrical current and can be fitted or removed at any time without isolating the track power supply, though Maytoni recommends fitting them before energising a newly installed track to prevent accidental contact with live terminals.

    Specification
    Height 0.8cm
    Length 2.5cm
    Width 0.6cm
    Finish White
    Construction Plastic
    Warranty 2 Year Guarantee
    Downloads

    Product Manual

    Frequently Asked

    Are these compatible with recessed magnetic track?

    No. These end caps are designed specifically for Maytoni's surface-mounted magnetic track profile. Recessed track systems use a different profile and require separate end cap components.

    Can the end caps be fitted after the track is powered?

    Yes, the caps clip onto the track end and do not carry electrical current, so they can be added or removed at any time. However, Maytoni recommends fitting them before energising a newly installed track to avoid accidental contact with exposed terminals.

    Do I need one pack per track run?

    Each pack contains two end caps. A single straight track run terminating at both ends requires one pack. If you are installing multiple track sections that each need closing at one or both ends, calculate the total number of open ends and divide by two to determine how many packs are needed.

    Shipping & Returns

    Free worldwide delivery

    Free worldwide delivery on all orders over £99. International orders for third-party brand products may be subject to an additional courier surcharge based on volumetric weight, particularly on larger lighting fixtures — if a surcharge applies, our team will email you with the amount before dispatch and you can proceed or cancel for a full refund. See full delivery terms.

    Returns

    30-day returns window from delivery. As all our products are electrical or lighting goods, returned items must be inspected and recertified by a qualified electrician before resale — the cost of this inspection (25–40% of the item value) is deducted from your refund. Customers pay return shipping. Made-to-order, special-order and clearance items cannot be returned. See full returns policy.