Description
Our Radiating Faceted Triangles 3D wall panels are white PVC, each a 50 x 50cm square with a relief 30mm deep. Eight faceted triangular pyramids fill the panel, mirrored either side of a vertical centre line, their peaks set off centre so each face catches the light at its own angle. Most of the lines between them radiate from a point about two-thirds of the way down the centre line. Across the top, two pyramids meet in a large diamond that spans the full width, a long pyramid runs down the lower two-thirds of each side, and four smaller ones fill the top corners and the bottom edge.
These panels are made for interior walls in homes, offices, hotels and shops. Fitted across a feature wall behind a bed, a sofa or a reception desk, the design repeats panel after panel into a bold geometric pattern, and the radiating lines draw the eye across the wall. The depth of the relief shows most when light comes from the side: a lamp or window to one side picks out every facet in crisp shades of light and shadow, while light from the front keeps the wall calm and bright. The design sits easily in most schemes and lets the shape do the work.
Each panel is made from a 0.8mm sheet, and fitting needs no special equipment. Spread adhesive on the back, press the panel onto the wall, cut panels to fit at the edges, then fill the joins with filler and wipe them clean. Adhesive and filler are sold separately. Four panels cover one square metre, which makes it simple to work out how many a wall needs. PVC is waterproof and low maintenance, so the panels wipe clean with a damp cloth. For a balanced wall, start at the centre and work outwards, so any cut panels sit evenly at both ends.
Specification
| Pattern |
Radiating Faceted Triangles |
| Colour |
White |
| Material |
PVC |
| Panel Size |
50 x 50cm |
| Relief Depth |
30mm |
| Sheet Thickness |
0.8mm |
| Coverage Per Panel |
0.25m² |
| Fixing |
Adhesive (Sold Separately) |
| Joins |
Filler (Sold Separately) |
| Suitable For |
Interior Walls |
Frequently Asked
What does the Radiating Faceted Triangles pattern look like?
Eight faceted triangular pyramids with off-centre peaks are mirrored either side of a vertical centre line, and most of their edges radiate from a point about two-thirds of the way down. The two upper pyramids meet in a large diamond across the top.
How big is each panel and how many will I need?
Each panel is a 50 x 50cm square, and four panels cover one square metre, so measure your wall in square metres and allow four panels for every one.
How are the panels fixed to the wall?
Spread adhesive on the back of each panel and press it onto the wall. No special equipment is needed, and the joins are filled with filler and wiped clean.
Do the panels come with adhesive and filler?
No, neither comes with the panels, so you will need to buy the adhesive for fixing and the filler for the joins on their own.
Can I cut the panels to fit my wall?
Yes, each panel cuts to fit, so you can trim panels where they meet the edges of the wall and keep the pattern running neatly.
How deep is the relief on these 3D wall panels?
The relief is 30mm deep, which gives the facets clear contrasts of light and shadow when light falls across the wall from one side.