Free Delivery on all orders over £99*

QTX X48R3KH 2-Way Crossover, 200W, 3kHz

£1699
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

This QTX 2-way crossover splits an incoming audio signal into high and low frequency bands, sending each to the right driver in your speaker. It works at a crossover point of 3kHz, so lower frequencies pass to the woofer while the higher frequencies go to the tweeter. The result is cleaner sound with each driver handling the range it is built for.

The crossover is rated at 200W and works with 4 or 8 ohm setups, giving you flexibility across a range of speaker builds. It uses a 12dB per octave slope, which gives a steady roll-off either side of the crossover point and helps keep the two frequency bands from overlapping too much. The components are chosen for good sound reproduction and reliable handling of the power passing through them.

Fitting a passive crossover like this one is a common part of building or repairing a two-way speaker, whether for hi-fi, PA or a custom cabinet. You wire it between the amplifier input and your two drivers, and it does its work with no external power needed. If you are matching parts, check the impedance and power rating against your drivers so everything sits within its limits.

Specification
Power 200W
Frequency 3kHz
Damping 12dB/Oct.
Impedance 8 Ohm
Downloads

Product Manual

Frequently Asked

What does a 2-way crossover do?

It splits the audio signal into two frequency bands, sending high frequencies to the tweeter and low frequencies to the woofer so each driver handles the range it suits.

What is the crossover frequency?

The crossover point is 3kHz. Frequencies below this pass to the low driver, and those above go to the high driver.

What impedance does it support?

It works with both 4 ohm and 8 ohm speaker setups.

How much power can it handle?

It is rated at 200W. Keep your amplifier and drivers within this figure for safe use.

What is the slope rating?

It uses a 12dB per octave slope, giving a steady roll-off either side of the 3kHz crossover point.

Does it need a power supply?

No. This is a passive crossover, so it wires between your amplifier and drivers without any external power.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    This QTX 2-way crossover splits an incoming audio signal into high and low frequency bands, sending each to the right driver in your speaker. It works at a crossover point of 3kHz, so lower frequencies pass to the woofer while the higher frequencies go to the tweeter. The result is cleaner sound with each driver handling the range it is built for.

    The crossover is rated at 200W and works with 4 or 8 ohm setups, giving you flexibility across a range of speaker builds. It uses a 12dB per octave slope, which gives a steady roll-off either side of the crossover point and helps keep the two frequency bands from overlapping too much. The components are chosen for good sound reproduction and reliable handling of the power passing through them.

    Fitting a passive crossover like this one is a common part of building or repairing a two-way speaker, whether for hi-fi, PA or a custom cabinet. You wire it between the amplifier input and your two drivers, and it does its work with no external power needed. If you are matching parts, check the impedance and power rating against your drivers so everything sits within its limits.

    Specification
    Power 200W
    Frequency 3kHz
    Damping 12dB/Oct.
    Impedance 8 Ohm
    Downloads

    Product Manual

    Frequently Asked

    What does a 2-way crossover do?

    It splits the audio signal into two frequency bands, sending high frequencies to the tweeter and low frequencies to the woofer so each driver handles the range it suits.

    What is the crossover frequency?

    The crossover point is 3kHz. Frequencies below this pass to the low driver, and those above go to the high driver.

    What impedance does it support?

    It works with both 4 ohm and 8 ohm speaker setups.

    How much power can it handle?

    It is rated at 200W. Keep your amplifier and drivers within this figure for safe use.

    What is the slope rating?

    It uses a 12dB per octave slope, giving a steady roll-off either side of the 3kHz crossover point.

    Does it need a power supply?

    No. This is a passive crossover, so it wires between your amplifier and drivers without any external power.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.