Free Delivery on all orders over £99*
Save 5%

QTX QR10 Replacement Driver, 10" Vented Chassis Speaker

£3499
RRP £3699
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

This is the 10" replacement driver for the QTX QR10 passive cabinet. It is part of our QR Passive Series range, made to swap in as the main driver when the original has worn out or been damaged. If you run QR10 cabinets and need to get them working again, this is the part you fit.

The driver uses vented magnets, which help keep the motor assembly cool during longer sessions and heavier use. It connects using spade terminals, so wiring it in is straightforward once you have the old unit out. The impedance is 8 Ohms, matching the standard rating for the QR10 cabinet so the load stays right for your amplifier.

Fitting a fresh driver is usually cheaper than replacing a whole cabinet, and it keeps a working speaker in service rather than sending it to waste. Note that this driver is designed specifically for the QR10, so check you have the correct size for your model before ordering. Other sizes in the QR Passive Series cover the rest of the QR range, and each one matches its own cabinet. If you are unsure which driver suits your setup, get in touch and we will help you find the right one.

Specification
Weight 2.85KG
Dimensions 108mm x 255mmØ
Voice coil 52mm (2")
SPL @ 1W/1m 95dB
Magnet weight 0.85KG
Frequency response 50Hz - 6kHz
Diameter 25cm (10")
Magnet size 120mm x 20mm
Power rms 150W
Power max. 300W
Impedance 8 Ohm
Frequently Asked

Which cabinet does this driver fit?

It is the 10" main driver for the QTX QR10 passive cabinet. Check your model number before ordering, as other sizes suit different QR cabinets.

What is the impedance?

The driver is rated at 8 Ohms, matching the standard load for the QR10 cabinet.

How does it connect?

It uses spade terminals, so you can wire it in once the old driver is removed.

What are vented magnets for?

The vented magnet design helps keep the motor assembly cooler during longer or heavier use.

Can I replace just the driver rather than the whole cabinet?

Yes. Swapping the driver is usually cheaper than buying a new cabinet and keeps your existing speaker in use.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    This is the 10" replacement driver for the QTX QR10 passive cabinet. It is part of our QR Passive Series range, made to swap in as the main driver when the original has worn out or been damaged. If you run QR10 cabinets and need to get them working again, this is the part you fit.

    The driver uses vented magnets, which help keep the motor assembly cool during longer sessions and heavier use. It connects using spade terminals, so wiring it in is straightforward once you have the old unit out. The impedance is 8 Ohms, matching the standard rating for the QR10 cabinet so the load stays right for your amplifier.

    Fitting a fresh driver is usually cheaper than replacing a whole cabinet, and it keeps a working speaker in service rather than sending it to waste. Note that this driver is designed specifically for the QR10, so check you have the correct size for your model before ordering. Other sizes in the QR Passive Series cover the rest of the QR range, and each one matches its own cabinet. If you are unsure which driver suits your setup, get in touch and we will help you find the right one.

    Specification
    Weight 2.85KG
    Dimensions 108mm x 255mmØ
    Voice coil 52mm (2")
    SPL @ 1W/1m 95dB
    Magnet weight 0.85KG
    Frequency response 50Hz - 6kHz
    Diameter 25cm (10")
    Magnet size 120mm x 20mm
    Power rms 150W
    Power max. 300W
    Impedance 8 Ohm
    Frequently Asked

    Which cabinet does this driver fit?

    It is the 10" main driver for the QTX QR10 passive cabinet. Check your model number before ordering, as other sizes suit different QR cabinets.

    What is the impedance?

    The driver is rated at 8 Ohms, matching the standard load for the QR10 cabinet.

    How does it connect?

    It uses spade terminals, so you can wire it in once the old driver is removed.

    What are vented magnets for?

    The vented magnet design helps keep the motor assembly cooler during longer or heavier use.

    Can I replace just the driver rather than the whole cabinet?

    Yes. Swapping the driver is usually cheaper than buying a new cabinet and keeps your existing speaker in use.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.