Description
This QTX Essential speaker lead gives you a straightforward, dependable connection between speakers and amplifiers. It runs 1.5m and finishes in a 6.3mm mono jack plug at each end, so it slots into most standard speaker and amp sockets without any adaptors. The jacks are moulded onto the cable, which keeps the join solid and helps the lead stand up to regular plugging and unplugging.
The cable itself measures 5.8mm in diameter and carries two conductors, each made from 30 strands at 0.17mm. That gives it enough flexibility to route around a stage or studio while holding up to day to day handling. A soft-grip, anti-tangle jacket means the lead coils away neatly and pulls back out without knotting, which saves time when you are setting up or packing down. The connections are machine-soldered for consistency across every unit.
At 1.5m this is a handy length for short runs between nearby gear, whether that is linking a speaker to a mixer or connecting instruments in a compact rig. The 6.3mm mono jack, sometimes called a quarter-inch jack, is a common fitting across guitars, PA speakers and audio interfaces, so this lead earns its place as a general-purpose spare. If you need reliable audio without paying for extras you will not use, this Essential lead covers the basics well.
Specification
| Length |
1.5m |
| Cable : diameter |
5.8mmØ |
| Conductors |
2 x 30 strand, 0.17mmØ |
| Connectors |
2 x 6.3mm mono jack plugs |
Frequently Asked
What connectors does this lead use?
It has a 6.3mm mono jack plug at each end, sometimes called a quarter-inch jack.
How long is the cable?
The lead is 1.5m long, suited to short runs between nearby equipment.
What is the cable diameter?
The cable measures 5.8mm in diameter.
What are the conductors made from?
There are two conductors, each with 30 strands at 0.17mm.
Is it prone to tangling?
No, it has a soft-grip, anti-tangle jacket that coils and unrolls cleanly.
Are the connections soldered?
Yes, the connections are machine-soldered for consistent quality.