Free Delivery on all orders over £99*
Save 3%

QTX 12" Replacement Driver for QT12 Speakers

£3399
RRP £3499
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

This is a 12" replacement driver (also called a chassis speaker) made for the QTX QT series. If your QT12 cabinet has taken a knock or the original driver has failed, this gives you a like-for-like part to get things working again without replacing the whole speaker.

The driver runs at 8 ohms impedance and connects using spade terminals, so wiring it back in is straightforward. It sits as a woofer in full-range cabinets, handling the lower and mid frequencies while the cabinet's other components take care of the top end. Because it's built to match the QT series, you don't need to worry about fit or spacing.

We supply this as part of our range of QTX replacement drivers, so if you run more than one QT12 you can keep spares on hand. Fitting is a job most people can manage with basic tools, and it saves the cost and hassle of buying a new cabinet outright. If you're unsure whether this is the right driver for your model, check the part number (178.409UK) against your speaker before ordering.

Specification
Weight 1.83KG
Dimensions 121mm x 305mmØ
Voice coil 35mm (1.35")
SPL @ 1W/1m 93dB
Magnet weight 0.85KG
Frequency response 45Hz - 6kHz
Diameter 30cm (12")
Magnet size 120mm x 20mm
Power rms 150W
Power max. 300W
Impedance 8 Ohm
Frequently Asked

Which speaker does this driver fit?

It's made for the QTX QT12 and other QT series speakers that use a 12" woofer. Check your model against part number 178.409UK before ordering.

What is the impedance?

The driver is rated at 8 ohms, matching the original QT series specification.

How does it connect?

It uses spade terminals, so you can wire it back in without soldering.

Is this a woofer or a full-range driver?

It works as a woofer in full-range speaker cabinets, handling the low and mid frequencies.

Can I fit it myself?

Yes. Most people can fit it with basic tools by removing the old driver and connecting the spade terminals to the new one.

Can I buy more than one?

Yes. It's sold as a single driver, so order the quantity you need if you have several QT12 cabinets.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    This is a 12" replacement driver (also called a chassis speaker) made for the QTX QT series. If your QT12 cabinet has taken a knock or the original driver has failed, this gives you a like-for-like part to get things working again without replacing the whole speaker.

    The driver runs at 8 ohms impedance and connects using spade terminals, so wiring it back in is straightforward. It sits as a woofer in full-range cabinets, handling the lower and mid frequencies while the cabinet's other components take care of the top end. Because it's built to match the QT series, you don't need to worry about fit or spacing.

    We supply this as part of our range of QTX replacement drivers, so if you run more than one QT12 you can keep spares on hand. Fitting is a job most people can manage with basic tools, and it saves the cost and hassle of buying a new cabinet outright. If you're unsure whether this is the right driver for your model, check the part number (178.409UK) against your speaker before ordering.

    Specification
    Weight 1.83KG
    Dimensions 121mm x 305mmØ
    Voice coil 35mm (1.35")
    SPL @ 1W/1m 93dB
    Magnet weight 0.85KG
    Frequency response 45Hz - 6kHz
    Diameter 30cm (12")
    Magnet size 120mm x 20mm
    Power rms 150W
    Power max. 300W
    Impedance 8 Ohm
    Frequently Asked

    Which speaker does this driver fit?

    It's made for the QTX QT12 and other QT series speakers that use a 12" woofer. Check your model against part number 178.409UK before ordering.

    What is the impedance?

    The driver is rated at 8 ohms, matching the original QT series specification.

    How does it connect?

    It uses spade terminals, so you can wire it back in without soldering.

    Is this a woofer or a full-range driver?

    It works as a woofer in full-range speaker cabinets, handling the low and mid frequencies.

    Can I fit it myself?

    Yes. Most people can fit it with basic tools by removing the old driver and connecting the spade terminals to the new one.

    Can I buy more than one?

    Yes. It's sold as a single driver, so order the quantity you need if you have several QT12 cabinets.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.