Description
This is a round LED wall light with a white steel body and a white plastic shade finished with a crystal effect, so the surface catches the light in tiny points of sparkle that gather near the top edge and fade gently across the lower half. It measures 31cm in diameter and a slim 5.5cm in height, so it sits low against the wall. The LEDs are integrated, which means there is no separate bulb to buy, and they give 1,800lm at 4000K, a neutral light that sits between warm and cool. It is rated IP20, so it belongs indoors in a dry room.
The built-in microwave sensor activates the light whenever it detects movement, which makes it a natural choice for a hallway, a landing or a stairwell, where you want light the moment you arrive rather than a switch to find in the dark. It suits a walk-in wardrobe or a storage room just as well, places where your hands are often full. Because it sits close to the wall, it works in narrow spaces where a deeper light would get in the way, and the white finish blends quietly with most painted walls. The sparkle in the shade gives a plain corridor a little character.
The steel body and plastic shade keep the whole light to just 0.42KG, so it is easy to hold in place while it is fitted. It runs on mains power at 220-240V, 50/60Hz, and as a wired-in mains light it is installed by a qualified electrician; the installation instructions are available as a download. The plastic shade needs nothing more than an occasional wipe with a soft dry cloth, with the power off, to keep the crystal effect bright. Before you order, check that you have a clear patch of wall 31cm across where you want it.
Specification
| Lumens |
1,800lm |
| Colour Temperature |
4000K |
| Body Material |
Steel |
| Body Colour |
White |
| Shade Material |
Plastic with crystal effect |
| Shade Colour |
White |
| IP Rating |
IP20 |
| Light Source |
LED, integrated |
| Energy Class |
F |
| Height |
5.5cm |
| Diameter |
31cm |
| Weight |
0.42KG |
| Protection Class |
Class I |
| Voltage |
220-240V, 50/60Hz |
| Switch |
Microwave sensor |
Downloads
Installation Instructions (PDF)
Frequently Asked
Can this wall light go in a bathroom or outdoors?
No. It is rated IP20, which means it is meant for dry indoor rooms only, so keep it away from bathrooms, wet areas and outdoor spaces.
How does the motion sensor work?
It has a built-in microwave sensor that activates the light whenever it detects movement, so you get light in a hallway or a landing without reaching for a switch.
How bright is the light?
The integrated LEDs give 1,800lm at 4000K, a neutral light that sits between warm and cool and suits a hallway, landing or stairwell.
Do I need to buy a bulb?
No, the LEDs are integrated into the light itself, so there is no separate bulb to buy and nothing extra to fit.
What size is the light?
It measures 31cm in diameter and 5.5cm in height, and it weighs 0.42KG, so it sits low and slim against the wall.
What is the crystal effect?
The white plastic shade has a crystal effect finish that catches the light in tiny points of sparkle, clustered near the top edge and fading across the lower half.