Description
Our Pleated Corner Fan 3D wall panels bring a crisp geometric pattern to a plain wall. About seven straight, folded pleats open out from one corner like a paper fan, each tapering to a point at the corner and widening to a small angled facet at the far edge, so a single fan fills every panel. The relief stands 15mm deep, enough for each pleat to show one bright face and one shaded face. Each panel is white PVC, a 50 x 50cm square, and four panels cover one square metre, which makes it simple to work out how many a wall needs.
The panels suit interior walls in homes, offices, hotels and shops, and they work best as a feature wall: behind a bed or sofa, along a hallway, or behind a reception desk or shop counter. Laid side by side, the fans repeat in neat rows across the wall, so a run of panels reads as one large rhythm of folds. Side light from a window or a wall lamp picks out each pleat, so the pattern shifts as the light moves through the day, while the white keeps it calm in a busy room.
The panel is formed from a 0.8mm PVC sheet. To fit it, spread adhesive on the back and press it onto the wall; it cuts to fit at corners and edges, and the joins are filled with filler and wiped clean, with no special equipment needed. Adhesive and filler are sold separately. A wipe with a damp cloth keeps it clean, and it needs little maintenance. For a balanced look, start the first row at the centre of the wall and work out towards both ends, so any cut panels sit evenly at each side.
Specification
| Pattern |
Pleated Corner Fan |
| Colour |
White |
| Material |
PVC |
| Panel Size |
50 x 50cm |
| Relief Depth |
15mm |
| Sheet Thickness |
0.8mm |
| Coverage Per Panel |
0.25m² |
| Fixing |
Adhesive (Sold Separately) |
| Joins |
Filler (Sold Separately) |
| Suitable For |
Interior Walls |
Frequently Asked
What does the Pleated Corner Fan pattern look like?
About seven straight folded pleats fan out from one corner of each panel like an open paper fan, each narrow at the corner and widening to an angled facet at the edge.
How many panels do I need for my wall?
Each panel is a 50 x 50cm square and four of them cover one square metre, so measure your wall in square metres and work from there, allowing for cuts at the edges.
How are the panels fixed to the wall?
Spread adhesive across the back of the panel and press it onto the wall, then fill the joins with filler and wipe them clean. No special equipment is needed.
Do I need to buy anything else to fit them?
Yes, you will need adhesive to fix the panels to the wall and filler for the joins, as neither comes with the panels.
Can I cut the panels to fit my wall?
Yes, the panels cut to fit, so you can trim them to finish neatly at corners and at the ends of a row.
How do I clean the panels?
Wipe the panels over with a damp cloth whenever they need it, and the white PVC keeps upkeep to a minimum.